Showing ordinances that apply to Port Washington, NY
Port Washington is an unincorporated community (population 16,753) in Nassau County, New York. Because Port Washington is not an incorporated city, it does not have its own municipal code. Instead, Nassau County ordinances apply directly to properties here. The shed rules rules below are the ones that govern your area.
Shed regulations in Nassau County vary by town and village, but most require building permits for sheds over 100-144 square feet, set minimum side/rear setbacks of 3-10 feet, and cap shed height at 10-15 feet. Sheds must be in rear yard only in most jurisdictions.
Typical Nassau town rules: Hempstead requires permits for sheds over 100 square feet (code section 302); North Hempstead and Oyster Bay have similar thresholds. Setbacks are typically 3 feet from rear/side property lines for small sheds, increasing to 5-10 feet for larger structures. Height usually capped at 10-12 feet. Sheds must be accessory to a principal residence, placed in the rear yard, and cannot exceed a percentage of lot coverage (typically 5-10 percent). Electrical or plumbing connections require separate permits.
Unpermitted sheds: $250-$2,500 plus removal order or required permit application with double fees. Setback violations may require relocation at owner expense.
See how Port Washington's shed rules rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.