Pool Barriers: Alpharetta vs Sandy Springs
How do pool barriers rules compare between Alpharetta, GA and Sandy Springs, GA?
Alpharetta and Sandy Springs have similar restriction levels.
Alpharetta, GA
Fulton County
Pool barriers in Fulton County must comply with IRC Appendix G (Swimming Pool Code). Minimum 5-ft height (Fulton standard), self-closing self-latching gates, no climb-helper openings.
View full Alpharetta rules →Sandy Springs, GA
Fulton County
Sandy Springs requires pool barriers meeting safety codes to prevent drowning. Fences must be at least 4 to 5 feet tall with self-closing, self-latching gates.
View full Sandy Springs rules →Key Facts Comparison
| Fact | Alpharetta | Sandy Springs |
|---|---|---|
| Fulton min height | 60 in | - |
| Gate latch | 54+ in above grade | - |
| Climb gap | ≤ 1.75 in horizontal | - |
| Min Height | - | 48 to 60 inches |
| Gates | - | Self-closing, self-latching |
| Openings | - | Less than 4 inches |
| Enforcement | - | Inspection at permit |
Highlighted rows indicate differences between cities.
Alpharetta FAQ
Can my house wall count as one side?
Yes with door alarms per IRC AG105.2.
Are pet doors allowed?
No — must have child-resistant latches if barrier-side door.
Sandy Springs FAQ
How tall does my pool fence need to be?
In Sandy Springs, pool barriers must be at least 48 to 60 inches tall depending on local code. Check your specific requirements.
Can my house wall serve as part of the pool barrier?
Yes, but doors accessing the pool area must have self-closing mechanisms or alarms in Sandy Springs.
Compare other topics
See how Alpharetta and Sandy Springs compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool