Bellevue vs Redmond
How do scaffold & sidewalk shed rules compare between Bellevue, WA and Redmond, WA?
Redmond has fewer restrictions than Bellevue.
Bellevue, WA
King County
Scaffold use in Bellevue is governed by Washington DOSH rules (WAC 296-874) and the Washington State Building Code, with right-of-way permits required for sidewalk encroachments.
View full Bellevue rules →Redmond, WA
King County
Redmond follows WA State Building Code and IBC Chapter 33 for scaffolds. Commercial scaffold work requires L and I compliance under WAC 296-874 and Redmond permits for right-of-way use.
View full Redmond rules →Key Facts Comparison
| Fact | Bellevue | Redmond |
|---|---|---|
| - | - | |
| Residential threshold | - | Permit typically over 10 ft |
| Governing code | - | IBC Ch 33 and WAC 296-874 |
| Right-of-way | - | ROW permit for sidewalk use |
| Inspections | - | Competent-person each shift |
Highlighted rows indicate differences between cities.
Bellevue FAQ
Redmond FAQ
Do I need a permit for a small scaffold at my Redmond home?
Usually no for scaffolding under 10 feet used by the homeowner, but commercial and taller scaffolds require permits and L and I compliance.
Can scaffolding block a Redmond sidewalk?
Only with a Redmond right-of-way permit and a covered pedestrian walkway when the scaffold exceeds 8 feet in height.
Compare other topics
See how Bellevue and Redmond compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool