Burbank vs Norwalk
How do material restrictions rules compare between Burbank, CA and Norwalk, CA?
Burbank and Norwalk have similar restriction levels.
Burbank, CA
Los Angeles County
Front yard fences over 2 ft must use open design (50% open per 1-ft section). Masonry walls up to 6 ft may add 12 inches of vinyl, wood, or metal on top. Corner cutoff areas restrict structures to 3 ft maximum below 10 ft height.
View full Burbank rules →Norwalk, CA
Los Angeles County
Norwalk regulates fence materials by zone. Wood, vinyl, and wrought iron are standard. Chain-link may be restricted in front yards. Barbed wire residential use prohibited.
View full Norwalk rules →Key Facts Comparison
| Fact | Burbank | Norwalk |
|---|---|---|
| Front Yard | 50% open design above 2 ft | - |
| Masonry Extension | 12-inch vinyl/wood/metal cap allowed | - |
| Corner Cutoff | Max 3 ft structures | - |
| Open Design | Must provide direct views through | - |
| Approved | - | Wood, vinyl, wrought iron |
| Chain-Link | - | May be restricted |
| Barbed Wire | - | Prohibited residential |
| Historic | - | Design review may apply |
Highlighted rows indicate differences between cities.
Burbank FAQ
Can I build a solid fence in my Burbank front yard?
Below 2 feet yes. Above 2 feet, at least 50% must be open design allowing direct views through.
What fence materials are allowed in Burbank?
Wood, masonry, concrete, vinyl, metal, chain-link, and wrought iron are all permitted, subject to height and design requirements.
Norwalk FAQ
Can I use chain-link fencing?
Often restricted in front yards. Rear/side yards may allow it. Check Norwalk zoning code.
What materials are prohibited?
Barbed wire, razor wire, and electric fences are typically prohibited in residential zones.
Compare other topics
See how Burbank and Norwalk compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool