Colorado Springs vs Manitou Springs
How do hot tub rules rules compare between Colorado Springs, CO and Manitou Springs, CO?
Colorado Springs, CO
El Paso County
Hot tubs and spas in Colorado Springs over 24 inches deep require a building and electrical permit through Pikes Peak Regional Building Department. They must have either a compliant barrier (60-inch fence) or a locking rigid safety cover meeting ASTM F1346. Electrical work must comply with NEC Article 680 bonding and GFCI requirements.
View full Colorado Springs rules →Manitou Springs, CO
El Paso County
No data available yet for Manitou Springs.
Key Facts Comparison
| Fact | Colorado Springs | Manitou Springs |
|---|---|---|
| Permit Threshold | Over 24 inches deep | - |
| Barrier Alternative | ASTM F1346 locking cover | - |
| Electrical | NEC 680 bonding and GFCI | - |
| Deck Rules | Separate permit over 200 sq ft | - |
| High-Altitude Note | Propane heaters need mechanical permit | - |
Highlighted rows indicate differences between cities.
Colorado Springs FAQ
Do I need a fence for my Colorado Springs hot tub?
Not if you have a locking rigid cover meeting ASTM F1346 standards and use it whenever the tub is unattended. Without a compliant cover you need the same 60-inch barrier required for pools.
Can I install my own hot tub in Colorado Springs?
Yes for the tub placement, but electrical work requires a licensed electrician in Colorado and must pass NEC 680 inspection. Homeowners may pull electrical permits for their own primary residence but must still meet code.
Manitou Springs FAQ
No FAQs available.
Compare other topics
See how Colorado Springs and Manitou Springs compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool