Panel Permits: Duluth vs Snellville
How do panel permits rules compare between Duluth, GA and Snellville, GA?
Duluth and Snellville have similar restriction levels.
Duluth, GA
Gwinnett County
Rooftop solar installations in Duluth require a building permit and electrical permit. Net metering interconnection handled through Georgia Power or Jackson EMC depending on service territory.
View full Duluth rules →Snellville, GA
Gwinnett County
Snellville requires building and electrical permits for solar PV installations. Plan review includes structural capacity, fire setbacks, and interconnection with Georgia Power or Walton EMC.
View full Snellville rules →Key Facts Comparison
| Fact | Duluth | Snellville |
|---|---|---|
| Permits | Building + electrical required | Building + electrical |
| Inspection | Final before interconnection | - |
| Utility | Georgia Power or Jackson EMC | Georgia Power/Walton EMC interconnection |
| Net Metering | Monthly net (limited) | - |
| Ground Mount | Must meet setbacks | - |
| Fire Setbacks | - | Per IRC R324 (3 ft or AHJ rules) |
| Structural Review | - | Required if loading exceeds design |
Highlighted rows indicate differences between cities.
Duluth FAQ
Do I need a permit to install solar panels in Duluth?
Yes. Building and electrical permits are required through Duluth Building Department. After installation, you'll need a final inspection and interconnection approval from your utility (Georgia Power or Jackson EMC).
Does Georgia Power offer 1:1 net metering?
No. Georgia Power's tariff uses limited monthly netting, not full 1:1 retail credit for solar export.
Do ground-mount solar arrays have setbacks in Duluth?
Yes. Ground-mount systems must meet the zoning setbacks for accessory structures in your district.
Snellville FAQ
How do I get a solar permit in Snellville?
Submit plans to the Snellville Planning and Development Department showing layout, structural, and electrical details, plus your utility interconnection application.
Do Snellville solar panels need Georgia Power approval?
Yes if Georgia Power is your utility. Walton EMC customers interconnect through Walton. The interconnection agreement must be in place before final inspection.
Are fire setbacks required for rooftop solar in Snellville?
Yes. Per IRC R324, typical rooftop arrays must leave 18-36 inch clear paths at the ridge and eaves for firefighter access.
Compare other topics
See how Duluth and Snellville compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool