Setback Rules: East Honolulu vs Ewa Gentry
How do setback rules rules compare between East Honolulu, HI and Ewa Gentry, HI?
East Honolulu and Ewa Gentry have similar restriction levels.
East Honolulu, HI
Honolulu County
East Honolulu residential building setbacks follow ROH 21-4.30 and the residential-district standards in ROH 21-3.70-1, with view-corridor sensitivity along Hawaii Kai ridges and Maunalua Bay shoreline.
View full East Honolulu rules →Ewa Gentry, HI
Honolulu County
ROH Sec. 21-4.30 is the primary setback rule for Ewa Gentry lots, establishing minimum front, side, and rear yards plus street setbacks keyed to each residential zoning district.
View full Ewa Gentry rules →Key Facts Comparison
| Fact | East Honolulu | Ewa Gentry |
|---|---|---|
| Primary section | ROH 21-4.30 | - |
| Residential specifics | ROH 21-3.70-1 | - |
| R-5 front yard | 10 feet typical | - |
| Shoreline overlay | State setback applies | - |
| - | - |
Highlighted rows indicate differences between cities.
East Honolulu FAQ
What setback applies to a Hawaii Kai home?
Most East Honolulu R-5 and R-7.5 lots require a 10-foot front yard, 5-foot side yards, and 5-foot rear yards under ROH 21-4.30 and 21-3.70-1. R-10 ridge lots often require larger yards.
Does the shoreline change the setback?
Yes. Maunalua Bay and Portlock oceanfront parcels must meet state shoreline setback rules in addition to ROH 21-4.30. Accessory structures and pools often trigger Special Management Area review.
Ewa Gentry FAQ
How far back must a new home sit from the street?
Street setbacks vary by district, but most Ewa Gentry residential lots require at least a 10 to 15 foot street yard under 21-4.30 and 21-3.70-1.
Can eaves or porches project into the required yard?
Limited eave and porch projections are allowed, but you must follow the specific dimensions in the LUO.
Compare other topics
See how East Honolulu and Ewa Gentry compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool