Setback Rules: Fillmore vs Thousand Oaks
How do setback rules rules compare between Fillmore, CA and Thousand Oaks, CA?
Fillmore and Thousand Oaks have similar restriction levels.
Fillmore, CA
Ventura County
Fillmore's zoning code establishes minimum building setbacks from property lines that vary by zone. R-1 residential zones typically require 20-foot front setbacks, 5-foot side setbacks, and 15-foot rear setbacks. ADUs have reduced setbacks of 4 feet per California state law.
View full Fillmore rules →Thousand Oaks, CA
Ventura County
Building setbacks in Thousand Oaks are established by TOMC Chapter 9 and vary by zoning district. Typical residential setbacks are 20-25 feet for front yards, 5-10 feet for side yards, and 15-25 feet for rear yards. Hillside overlay zones may have additional setback requirements.
View full Thousand Oaks rules →Key Facts Comparison
| Fact | Fillmore | Thousand Oaks |
|---|---|---|
| Front Setback | 20 feet typical in R-1 | - |
| Side Setback | 5 feet interior, 10 feet street-side | - |
| Rear Setback | 15 feet typical | - |
| ADU Setback | 4 feet side/rear per state law | - |
| Contact | (805) 524-1500 ext 234 | - |
| Front Yard | - | Typically 20-25 ft |
| Side Yard | - | Typically 5-10 ft |
| Rear Yard | - | Typically 15-25 ft |
| ADUs | - | 4 ft setbacks under state law |
Highlighted rows indicate differences between cities.
Fillmore FAQ
What are the building setbacks in Fillmore?
Typical R-1 residential setbacks are 20 feet front, 5 feet side, and 15 feet rear. Street-side yards on corner lots require 10 feet. Contact Community Development at (805) 524-1500 ext 234 for your specific zone.
Can I get a variance for a setback in Fillmore?
Yes. Setback variances require an application to the Planning Commission demonstrating hardship unique to your property. Contact Community Development for the variance application process and fees.
Do eaves count in setback measurements?
Minor architectural projections like eaves may encroach into setbacks by limited amounts (typically 2-3 feet). The setback is measured from the property line to the nearest structural wall.
Thousand Oaks FAQ
What are the building setbacks in Thousand Oaks?
Setbacks vary by zoning district. Typical single-family residential setbacks are 20-25 feet front, 5-10 feet side, and 15-25 feet rear. Check your specific zone with Community Development at (805) 449-2100.
Can I build closer to the property line than the setback allows?
Only with a variance approved through a public hearing process, or for structures allowed reduced setbacks like ADUs (4 feet under state law) and certain accessory structures.
Do eaves and gutters count in setback measurements?
Minor projections like eaves, gutters, and architectural features are typically allowed to encroach 2-3 feet into required setbacks.
Compare other topics
See how Fillmore and Thousand Oaks compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool