Height Limits: Jurupa Valley vs Riverside
How do height limits rules compare between Jurupa Valley, CA and Riverside, CA?
Jurupa Valley and Riverside have similar restriction levels.
Jurupa Valley, CA
Riverside County
In Jurupa Valley residential zones, the maximum fence height along side and rear property lines is six (6) feet. Within the street setback area (front yard), solid fencing such as concrete block or wood may not exceed forty-two (42) inches, with up to two (2) additional feet of open fencing permitted on top of the solid portion. Standards are administered by the Planning Department under Title 9 (Planning and Zoning) of the Jurupa Valley Municipal Code.
View full Jurupa Valley rules →Riverside, CA
Riverside County
Per Riverside Municipal Code Chapter 19.550 (Fences, Walls, Landscaping and Maintenance), fences in residential front-yard setbacks are limited to roughly 4 feet (with openwork above 3 feet) and to 6 feet in side and rear yards; fences over 7 feet require a building permit.
View full Riverside rules →Key Facts Comparison
| Fact | Jurupa Valley | Riverside |
|---|---|---|
| Side/rear max height | 6 feet (residential) | - |
| Front (street setback) solid max | 42 inches | - |
| Open fencing above solid in front | +24 inches allowed | - |
| Code title | Title 9 Planning and Zoning | - |
| Planning Dept. | (951) 332-6464 | - |
| Code chapter | - | RMC Chapter 19.550 (Fences, Walls, Landscaping) |
| Front-yard max height | - | ~4 ft (openwork required above 3 ft) |
| Side/rear yard max height | - | 6 ft |
| Permit threshold | - | Over 7 ft requires building permit |
| Enforcement | - | RMC Ch. 1.17 administrative citations |
Highlighted rows indicate differences between cities.
Jurupa Valley FAQ
Can I build a 6-foot solid wood fence in my front yard?
No. In the street setback area, the solid portion of a fence or wall may not exceed 42 inches per the Planning Department's published standards. You may add up to 24 inches of open fencing (lattice, wrought iron) on top of the 42-inch solid base.
Do I need a permit for a 6-foot fence?
A planning approval is needed to verify height and setback compliance, and a building permit is generally required for any wall over 6 feet in height or any masonry/block wall over 3 feet from top of footing. Call the Building Division at (951) 332-6464 before construction.
Riverside FAQ
How tall can my front-yard fence be in Riverside?
Per RMC Chapter 19.550, fences in residential front-yard setbacks are generally limited to about 4 feet, with any portion above 3 feet required to be openwork construction (e.g., wrought iron) to preserve sight lines. Solid fences taller than that in the front yard require Planning Division review.
Do I need a permit for a 6-foot backyard fence?
No. Per the California Building Code as adopted by Riverside, fences not exceeding 7 feet in height are exempt from a building permit. A 6-foot rear or side yard fence is allowed without a building permit, though Planning approval may still apply in special overlay districts.
What happens if I build a fence that's too tall?
Riverside Code Enforcement can issue an administrative citation under RMC Chapter 1.17, starting at $100 for a first violation, $200 for a second within 12 months, and $500 for each additional violation. You may also be required to lower or remove the noncompliant fence.
Compare other topics
See how Jurupa Valley and Riverside compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool