Kent vs Redmond
How do scaffold & sidewalk shed rules compare between Kent, WA and Redmond, WA?
Kent and Redmond have similar restriction levels.
Kent, WA
King County
Kent follows Washington State Building Code (WAC 296-874) and IBC Chapter 33 for scaffolding. Commercial scaffold work requires L and I permits and daily safety inspections.
View full Kent rules →Redmond, WA
King County
Redmond follows WA State Building Code and IBC Chapter 33 for scaffolds. Commercial scaffold work requires L and I compliance under WAC 296-874 and Redmond permits for right-of-way use.
View full Redmond rules →Key Facts Comparison
| Fact | Kent | Redmond |
|---|---|---|
| Residential threshold | Permit typically required over 10 ft | Permit typically over 10 ft |
| Governing code | IBC Ch 33 and WAC 296-874 | IBC Ch 33 and WAC 296-874 |
| Right-of-way | ROW permit needed for sidewalk use | ROW permit for sidewalk use |
| Inspections | Competent-person check each shift | Competent-person each shift |
Highlighted rows indicate differences between cities.
Kent FAQ
Do I need a permit for a small homeowner scaffold?
Generally no for residential scaffolding under 10 feet used by the homeowner, but commercial and taller scaffolds require permits and L and I compliance.
Can scaffolding block the sidewalk?
Only with a Kent right-of-way permit and covered pedestrian walkway when the scaffold exceeds 8 feet in height.
Redmond FAQ
Do I need a permit for a small scaffold at my Redmond home?
Usually no for scaffolding under 10 feet used by the homeowner, but commercial and taller scaffolds require permits and L and I compliance.
Can scaffolding block a Redmond sidewalk?
Only with a Redmond right-of-way permit and a covered pedestrian walkway when the scaffold exceeds 8 feet in height.
Compare other topics
See how Kent and Redmond compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool