Lot Coverage Limits: Lexington vs Lowell
How do lot coverage limits rules compare between Lexington, MA and Lowell, MA?
Lexington and Lowell have similar restriction levels.
Lexington, MA
Middlesex County
Maximum lot coverage is set by municipal zoning under MGL c.40A. Residential districts commonly cap coverage at 25-40 percent; urban lots allow more.
View full Lexington rules →Lowell, MA
Middlesex County
Lowell lot coverage limits range from about 30 percent in suburban single-family zones to 80 percent or more downtown, with open space requirements in multifamily districts.
View full Lowell rules →Key Facts Comparison
| Fact | Lexington | Lowell |
|---|---|---|
| Suburban typical | 25-40 percent | - |
| Urban metric | FAR often used | - |
| Impervious cap | Tied to MS4 stormwater | - |
| Includes | Buildings, pools, decks | - |
| Relief | ZBA variance | - |
| Suburban coverage | - | About 30 percent |
| Urban coverage | - | 70 to 80 percent |
| Open space | - | Required in multifamily |
| Stormwater trigger | - | Impervious thresholds |
Highlighted rows indicate differences between cities.
Lexington FAQ
Does the driveway count?
Some bylaws include paved driveways in impervious surface limits even if not in building coverage.
What if I exceed the cap?
You must seek a variance or reduce the footprint before the building department will issue a permit.
Lowell FAQ
Does a driveway count toward lot coverage?
Pavement counts toward impervious coverage for stormwater, but usually not toward building coverage unless your district defines lot coverage to include all structures.
Can I exceed the coverage limit?
Only with a dimensional variance from the Zoning Board of Appeals, which requires proof of hardship under MGL c.40A.
Compare other topics
See how Lexington and Lowell compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool