Skip to main content
CityRuleLookup
🏊 Swimming Pools & Spas/Fencing Requirements

Fencing Requirements: Mead Valley vs Moreno Valley

How do fencing requirements rules compare between Mead Valley, CA and Moreno Valley, CA?

Mead Valley and Moreno Valley have similar restriction levels.

Mead Valley, CA

Riverside County

Heavy Restrictions

Unincorporated Riverside County requires an enclosure barrier at least 60 inches high around outdoor pools and spas under Ordinance 421. The bottom gap may not exceed 2 inches (4 inches over a solid deck). Gates must be self-closing and self-latching, swing away from the pool, and meet latch-height rules. Chain link must be 11 gauge.

View full Mead Valley rules →

Moreno Valley, CA

Riverside County

Heavy Restrictions

Moreno Valley requires all swimming pools to have safety barriers per California Building Code Chapter 31. Barriers must be at least 5 feet high with self-closing, self-latching gates.

View full Moreno Valley rules →

Key Facts Comparison

FactMead ValleyMoreno Valley
Minimum barrier height60 inches above grade (Ord. 421 §3.1.1)-
Max bottom clearance2 inches (4 inches over a solid deck)-
Opening sizeNo passage of a 1-3/4-inch sphere-
GateSelf-closing, self-latching, swings away from pool-
Latch under 54 inchesRelease on pool side, 3 inches below gate top-
Chain linkMinimum 11 gauge; mesh fencing not allowed as primary barrier-
Barrier Height-5 ft minimum
Gate Latch-54 inches above ground
Openings-Max 4-inch gap
Code-CBC Chapter 31

Highlighted rows indicate differences between cities.

Mead Valley FAQ

How tall does my pool fence have to be in unincorporated Riverside County?

At least 60 inches (5 feet) above grade on the side facing away from the pool, per Ordinance 421, Section 3.1.1. The County's plan-check checklist also lists a 5-foot-minimum primary barrier. No rock outcropping or structure within 3 feet may reduce the effective height below 60 inches.

Can the gate latch be low so adults can reach it easily?

Only with safeguards. If the self-latching release is less than 54 inches from the bottom of the gate, Ordinance 421, Section 3.1.5 requires the release to be on the pool side at least 3 inches below the gate top, with no opening greater than 1/2 inch within 18 inches of the release. Pedestrian gates must also swing away from the pool.

Moreno Valley FAQ

What pool fencing is required in Moreno Valley?

A barrier at least 5 feet high with self-closing, self-latching gates per California Building Code.

Do I need a permit for pool fencing?

Pool barriers must meet CBC standards and are inspected as part of the pool building permit.

Compare other topics

See how Mead Valley and Moreno Valley compare on other ordinance categories.

Want to add a third city?

Use our full comparison tool to compare up to three cities.

Open Comparison Tool