Skip to main content
CityRuleLookup
🔊 Noise Ordinances/Industrial Noise

Industrial Noise: Pasadena vs South Gate

How do industrial noise rules compare between Pasadena, CA and South Gate, CA?

Pasadena and South Gate have similar restriction levels.

Pasadena, CA

Los Angeles County

Some Restrictions

Industrial noise in Pasadena is regulated under the general noise ordinance (PMC Chapter 9.36). Industrial operations must not exceed noise limits at property boundaries. Construction noise is separately regulated with specific hour restrictions.

View full Pasadena rules →

South Gate, CA

Los Angeles County

Some Restrictions

South Gate Municipal Code Chapter 11.34 (Noise Control Program) sets dBA Leq limits at the receiving-property line, measured against the actual ambient noise level. Noise standards are land-use-based and inclusive of ambient noise per Table 11.34-1. South Gate's manufacturing legacy (former GM Assembly site, active heavy-industrial corridors along Atlantic Ave, Tweedy Blvd, and the Alameda Corridor rail line) means industrial-to-residential conflicts are common. Industrial uses must meet the noise standard of the receiving zone, not the source zone — so a factory abutting a residential parcel must comply with residential limits at that shared property line. South Coast AQMD also separately regulates equipment-source emissions.

View full South Gate rules →

Key Facts Comparison

FactPasadenaSouth Gate
Code SectionPMC 9.36-
LimitsMust not exceed at property line-
ConstructionSeparate hour restrictions-
EnforcementCode Compliance-
Code section-South Gate Mun. Code Ch. 11.34
Measurement metric-dBA Leq at receptor property line
Receiving-use rule-Standard of receiving zone applies
Residential limit (day/night)-~50 dBA day / 40 dBA night
Auto repair hours-7 a.m.–10 p.m.; ≤5 dB over ambient (Ch. 11.40)
Concurrent state authority-Cal. H&S Code §41700; AQMD Rule 402

Highlighted rows indicate differences between cities.

Pasadena FAQ

What are the industrial noise limits in Pasadena?

Industrial and commercial operations must stay below 70 dBA during the day and 60 dBA at night, measured at the nearest residential property line.

How do I report industrial noise in Pasadena?

File a complaint with Pasadena Code Enforcement. They may conduct sound level measurements to determine if the source exceeds permitted levels.

South Gate FAQ

A factory next to my house runs all night — what limit applies?

The receiving-property's land use determines the limit. If your home is in a residential zone, the factory must keep noise at your shared property line at or below the residential nighttime standard (~40 dBA Leq) inclusive of ambient, per Chapter 11.34.

Can South Gate shut down a noisy industrial use?

Persistent violations can trigger administrative citations, conditional-use-permit review, or nuisance abatement. South Coast AQMD Rule 402 and Cal. H&S Code §41700 provide additional shutdown leverage for genuine public nuisances.

What about loading docks and truck idling?

Idling diesel trucks over 5 minutes are prohibited statewide under 13 CCR §2485 (CARB Anti-Idling Rule). Loading-dock noise must comply with Chapter 11.34 standards at the receiving property line.

Want to add a third city?

Use our full comparison tool to compare up to three cities.

Open Comparison Tool