Shed Rules: Riverview vs Tampa
How do shed rules rules compare between Riverview, FL and Tampa, FL?
Riverview and Tampa have similar restriction levels.
Riverview, FL
Hillsborough County
Sheds in unincorporated Hillsborough County under 150 square feet and 8 feet tall are exempt from building permit but must meet setbacks and Florida Building Code wind load standards. Larger sheds require permits and must be anchored to resist 140 mph winds. Rear setback is typically 7 feet.
View full Riverview rules →Tampa, FL
Hillsborough County
Sheds in Tampa over 100 square feet or taller than 12 feet require a building permit, with additional hurricane wind-load review due to the 140-mph design wind zone covering Hillsborough County. Setbacks and lot coverage limits apply regardless of permit exemption.
View full Tampa rules →Key Facts Comparison
| Fact | Riverview | Tampa |
|---|---|---|
| Permit Exempt | Under 150 sq ft | - |
| Wind Load | 140 mph design | - |
| Rear Setback | 7 feet typical | - |
| Side Setback | 5 feet typical | - |
| Anchoring | Required for manufactured | - |
| - | - |
Highlighted rows indicate differences between cities.
Riverview FAQ
Who enforces this in Hillsborough County?
Hillsborough County code enforcement at (813) 272-5900 handles complaints.
Who enforces this in Hillsborough County?
Hillsborough County code enforcement at (813) 272-5900 handles complaints.
Tampa FAQ
Compare other topics
See how Riverview and Tampa compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool