Setback Rules: Riverview vs Tampa
How do setback rules rules compare between Riverview, FL and Tampa, FL?
Riverview has fewer restrictions than Tampa.
Riverview, FL
Hillsborough County
Riverview is unincorporated Hillsborough County, so residential setbacks follow the Hillsborough County Land Development Code (LDC), specifically §6.01.01 (Schedule of District Area, Height, Bulk, and Placement Regulations). In the common RSC-6 residential district, minimum interior lot width is 40 feet (50 feet for corner lots), and structures taller than 20 feet require an additional 2 feet of setback for every 1 foot of height above 20 feet.
View full Riverview rules →Tampa, FL
Hillsborough County
Tampa establishes building setback requirements through Chapter 27 (Zoning and Land Development) of the Code of Ordinances. Setbacks vary by zoning district. Special setback provisions apply in flood zones per Section 27-163.
View full Tampa rules →Key Facts Comparison
| Fact | Riverview | Tampa |
|---|---|---|
| Governing Code | Hillsborough Co. LDC §6.01.01 | Tampa Code Ch. 27 (Zoning) |
| Common Zoning | RSC-6 (up to 6 du/acre) | - |
| Minimum Lot Width | 40 ft interior / 50 ft corner | - |
| Side/Rear Setback | 10 ft side / 15 ft rear (district boundary) | - |
| Height Step-Back | +2 ft setback per 1 ft over 20 ft height | - |
| RS Front | - | Generally 20-25 feet |
| RS Side | - | Generally 5-7.5 feet |
| RS Rear | - | Generally 15-20 feet |
| Flood Zone | - | Special setbacks per §27-163 |
Highlighted rows indicate differences between cities.
Riverview FAQ
What are the setback requirements in Riverview, Florida?
Riverview is unincorporated Hillsborough County, so setbacks follow the Hillsborough County Land Development Code §6.01.01. In RSC-6 zoning (most Riverview lots), minimum lot width is 40 ft and side/rear setbacks at district boundaries are 10 ft side and 15 ft rear.
Who do I call for a Riverview zoning question?
Hillsborough County Zoning Information & Counseling at 813-272-5600, Option 3. They handle setback, allowable use, and dimensional standard questions for all unincorporated areas, including Riverview.
Can I build a two-story home with normal setbacks?
Up to 20 feet of height, yes. Above 20 feet, LDC §6.01.01 requires an additional 2 feet of setback for every 1 foot of additional height. So a 25-ft-tall structure needs an extra 10 ft of setback (5 ft × 2).
Tampa FAQ
What are Tampa's residential setback requirements?
Typical single-family zones require 20-25 foot front setbacks, 5-7.5 foot side setbacks, and 15-20 foot rear setbacks. Check your specific zone in Chapter 27.
Are there special setbacks in flood zones?
Yes. Section 27-163 establishes additional setback requirements for construction in flood-prone areas.
Compare other topics
See how Riverview and Tampa compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool