Pool Barriers: Roswell vs Sandy Springs
How do pool barriers rules compare between Roswell, GA and Sandy Springs, GA?
Roswell and Sandy Springs have similar restriction levels.
Roswell, GA
Fulton County
Pools deeper than 24 inches must be enclosed by a barrier at least 48 inches (4 feet) tall on the outside-facing side. Gates must be self-closing and self-latching, with no gap allowing a 4-inch sphere through any opening.
View full Roswell rules →Sandy Springs, GA
Fulton County
Sandy Springs requires pool barriers meeting safety codes to prevent drowning. Fences must be at least 4 to 5 feet tall with self-closing, self-latching gates.
View full Sandy Springs rules →Key Facts Comparison
| Fact | Roswell | Sandy Springs |
|---|---|---|
| Min Height | 48 inches | 48 to 60 inches |
| Max Ground Gap | 4 in (2 in on loose substrate) | - |
| Opening Size | <4 in sphere | - |
| Gate | Self-closing, self-latching | - |
| Latch Height | 54 in from ground | - |
| Gates | - | Self-closing, self-latching |
| Openings | - | Less than 4 inches |
| Enforcement | - | Inspection at permit |
Highlighted rows indicate differences between cities.
Roswell FAQ
What height fence do I need around my Roswell pool?
At least 48 inches measured on the side facing away from the pool, per the Georgia State Minimum Standard Pool Code.
Can my house wall count as part of the pool fence?
Yes, if any door from the house to the pool is equipped with an alarm or a self-closing/self-latching device that meets code.
Sandy Springs FAQ
How tall does my pool fence need to be?
In Sandy Springs, pool barriers must be at least 48 to 60 inches tall depending on local code. Check your specific requirements.
Can my house wall serve as part of the pool barrier?
Yes, but doors accessing the pool area must have self-closing mechanisms or alarms in Sandy Springs.
Compare other topics
See how Roswell and Sandy Springs compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool