Matthews issues solar panel permits through Planning and Development with electrical and building permits per NC State Building Code. Residential rooftop solar is by-right in all zoning districts. Duke Energy net metering available under NC Utilities Commission rules.
Residential solar PV installations in Matthews require a combination building and electrical permit from Matthews Planning and Development. Rooftop systems are permitted by-right in all residential districts and do not require zoning review. Ground-mounted residential systems must meet accessory structure setbacks. Plans must include structural calculations demonstrating compliance with NC State Building Code wind loads (90 mph design), NEC 2020 electrical requirements, and manufacturer specifications. Duke Energy interconnection is governed by NC Utilities Commission-approved Net Energy Metering Rider. Permit fees typically 200-500 dollars for residential. Inspections required for rough electrical and final.
Unpermitted installations must be inspected retroactively with double permit fees. Non-compliant structural or electrical work requires correction. Duke Energy may decline interconnection for non-permitted systems.
Matthews, NC
Vehicle noise in Matthews is regulated under state law N.C.G.S. 20-128 requiring functional mufflers, plus local provisions prohibiting loud exhaust, revving...
Matthews, NC
Matthews enforces nighttime quiet hours from 11 PM to 7 AM on weekdays and 11 PM to 8 AM on weekends under the Town Code noise provisions, with plainly audib...
Matthews, NC
Matthews does not have a leaf-blower-specific ordinance; operation is governed by general noise and construction-hour restrictions in the Town Code.
Matthews, NC
Construction activity in Matthews is generally permitted 7 AM to 7 PM Monday through Saturday with Sunday restrictions, consistent with Mecklenburg County co...
Matthews, NC
Amplified music in Matthews requires special event permits when held outdoors in public spaces; residential amplified sound is subject to the plainly audible...
Matthews, NC
Aircraft noise in Matthews is governed exclusively by federal FAA regulations; local ordinances cannot regulate aircraft operations or altitudes.
Side-by-side rule comparisons with other cities in Mecklenburg County.
See how other cities in Mecklenburg County handle panel permits.
See how Matthews's panel permits rules stack up against other locations.
Quick Compare
Help us keep this page accurate. If you notice an error or outdated information, let us know.