Vermont Statewide Rule

Vermont Propane Storage Code Adoption Statewide

Heavy RestrictionsApplies statewide across Vermont (2026)

Vermont has adopted NFPA 58 (Liquefied Petroleum Gas Code) statewide as part of the Vermont Fire and Building Safety Code under 20 V.S.A. ยง 2731. The Division of Fire Safety enforces uniform tank siting, distance, and installation rules in every municipality.

Key Facts

Code: NFPA 58 (adopted)
Statute: 20 V.S.A. § 2731
Enforcement: Division of Fire Safety
Installer licensing: Required statewide
Local override: Not less stringent

Source: Vermont General Assembly

Full Breakdown

Under the Vermont Fire and Building Safety Code, all propane storage, including residential tanks above 125 gallons water capacity and all commercial systems, must comply with NFPA 58 setbacks, installation, and inspection requirements. Licensed propane installers must hold state credentials. Municipalities may not adopt less stringent local standards. The Division of Fire Safety inspects bulk facilities and investigates incidents. Tanks must meet minimum distances from buildings, property lines, and ignition sources based on capacity, and underground tanks require specific corrosion protection.

Violations & Penalties

Code violations: stop-work orders, fines up to $5,000 per occurrence, removal of installer licensure, and civil liability for incidents.

Frequently Asked Questions

Does NFPA 58 apply to small residential propane grills?

Portable cylinders under 125 gallons used for grilling have limited application, but installed tanks and home heating systems must meet the full code.

Who can install a propane tank in Vermont?

Only a licensed LP gas installer credentialed by the Vermont Division of Fire Safety may install or service propane systems.

Sources

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.