Typical Lawrenceville R-1 setbacks: 40 ft front, 10-15 ft side, 40 ft rear. R-2 and townhome districts have reduced setbacks. Measured from property line to nearest building element.
UDO sets setbacks per district. R-1 single-family: 40 ft front yard, 10-15 ft side yards (corner lots require larger street-side setback, often 25 ft), 40 ft rear. R-2 typically 30 ft front, 8-10 ft side, 30 ft rear. Townhome R-TH setbacks reduced, with zero side yards between attached units. Accessory structures have separate, smaller setbacks. Eaves/gutters may project into setbacks up to 2 feet.
Structure in setback: building permit denial; existing encroachments may require variance or removal.
Lawrenceville, GA
Abandoned vehicles regulated under GA Code Β§40-11-1+ (10 days on public property). Lawrenceville Code Enforcement investigates property maintenance violation...
Lawrenceville, GA
Commercial vehicles over 1-ton rating or with commercial lettering prohibited from overnight parking in residential zones. Semi-trucks and trailers banned in...
Lawrenceville, GA
Barbed wire, razor wire, and electrified fences prohibited in residential zones. Chain-link restricted from front yards. Historic district requires tradition...
Lawrenceville, GA
Retaining walls over 4 ft (measured from bottom of footing) require building permit and engineered design. Walls in setbacks must not affect drainage onto ne...
Lawrenceville, GA
Front yard fences max 4 ft; side and rear yard fences max 6 ft in residential zones. Fences over 6 ft require building permit. Corner lot sight-triangle rest...
Lawrenceville, GA
Pool barriers must be minimum 48 inches tall per GA Residential Code Appendix G (IRC). Self-closing, self-latching gates required. Openings cannot exceed 4 i...
Side-by-side rule comparisons with other cities in Gwinnett County.
See how other cities in Gwinnett County handle setback rules.
See how Lawrenceville's setback rules rules stack up against other locations.
Quick Compare
Help us keep this page accurate. If you notice an error or outdated information, let us know.