Pool Barriers: Bellevue vs Redmond
How do pool barriers rules compare between Bellevue, WA and Redmond, WA?
Bellevue and Redmond have similar restriction levels.
Bellevue, WA
King County
Pools over 24 inches deep need a 48-inch barrier with self-closing self-latching gates under the Washington State Building Code and IRC Appendix G. Openings must not pass a 4-inch sphere.
View full Bellevue rules →Redmond, WA
King County
Redmond requires a 48-inch pool barrier with self-closing, self-latching gate for any pool or spa over 24 inches deep under RMC 15.06, adopting IRC Appendix G. Permits and inspection are required.
View full Redmond rules →Key Facts Comparison
| Fact | Bellevue | Redmond |
|---|---|---|
| Height | 48 inches minimum | - |
| Sphere Gap | No 4-inch pass-through | - |
| Gate | Self-close, self-latch | Self-close, self-latch |
| Code | IRC Appendix G / WSBC | IRC Appendix G / RMC 15.06 |
| Barrier Height | - | 48 inches minimum |
| Latch Height | - | 54 inches minimum |
Highlighted rows indicate differences between cities.
Bellevue FAQ
Does a pool cover replace a fence in Bellevue?
No. Pool covers do not replace a 48-inch barrier. Only rigid locking safety covers meeting ASTM F1346 on hot tubs and spas qualify as an alternative.
Do I need a fence around an above-ground pool?
Yes, if water depth exceeds 24 inches. The pool wall may serve as the barrier if at least 48 inches tall and the ladder is removable or lockable.
Redmond FAQ
Does my hot tub need a fence in Redmond?
If the spa holds water deeper than 24 inches and lacks a locking cover, yes. A 48-inch barrier or an approved lockable safety cover is required.
Do I need a permit to install a pool in Redmond?
Yes. Redmond requires a building permit for pool construction, a separate electrical permit for equipment, and a barrier inspection before use.
Compare other topics
See how Bellevue and Redmond compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool