Pool Barriers: Bonsall vs Oceanside
How do pool barriers rules compare between Bonsall, CA and Oceanside, CA?
Bonsall and Oceanside have similar restriction levels.
Bonsall, CA
San Diego County
All swimming pools in unincorporated San Diego County must have safety barriers at least 60 inches high with self-closing, self-latching gates per the California Building Code and Swimming Pool Safety Act. Gates must open away from the pool with latches at least 60 inches above ground.
View full Bonsall rules →Oceanside, CA
San Diego County
All swimming pools in Oceanside must have safety barriers at least 60 inches high with self-closing, self-latching gates per California Health & Safety Code section 115920 and the building code. At least two of seven approved safety features are required.
View full Oceanside rules →Key Facts Comparison
| Fact | Bonsall | Oceanside |
|---|---|---|
| Minimum Height | 60 inches on pool side | - |
| Gate Latch Height | 60+ inches above ground | - |
| Gate Direction | Must open away from pool | - |
| Ground Clearance | 2 in max (4 in on concrete) | - |
| Code | County Code §92.1.3109.3 / CA Pool Safety Act | - |
| Barrier Height | - | 60 inches (5 ft) minimum |
| Gate Latch | - | 54 inches from ground on pool side |
| Safety Features | - | Minimum 2 of 7 required |
| Openings | - | Must not pass 4-inch sphere |
| State Law | - | CA HSC §115920 |
Highlighted rows indicate differences between cities.
Bonsall FAQ
How high must a pool fence be in San Diego County?
Pool barriers must be at least 60 inches (5 feet) high, measured on the side facing the pool. Gates must have self-closing and self-latching devices with latches at least 60 inches above ground.
Can I use chain link fence for my pool barrier?
Yes, but it must be at least 11.5 gauge wire with mesh openings no larger than 2.25-inch square to prevent children from climbing.
Do above-ground pools need barriers?
Yes. All pools containing water over 18 inches deep must have approved safety barriers. Above-ground pool walls may satisfy part of the barrier requirement if they meet height and climbing resistance standards.
Oceanside FAQ
What pool fencing does Oceanside require?
Pool barriers must be at least 60 inches high with self-closing, self-latching gates. At least two of seven approved safety features must be in place.
When must pool barriers be installed?
Barriers must be in place before the pool is filled with water. The building department inspects barriers as part of the permit process.
Does a safety cover count as a barrier?
A safety cover meeting ASTM F1346 standards counts as one of the two required safety features.
Compare other topics
See how Bonsall and Oceanside compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool