Fencing Requirements: Burbank vs Carson
How do fencing requirements rules compare between Burbank, CA and Carson, CA?
Burbank and Carson have similar restriction levels.
Burbank, CA
Los Angeles County
Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).
View full Burbank rules →Carson, CA
Los Angeles County
Carson incorporates California's statewide pool barrier law through its Building Code. Under California Health and Safety Code § 115923, any enclosure used as a Swimming Pool Safety Act drowning-prevention feature for a single-family pool must be at least 60 inches high, have no gaps allowing a 4-inch sphere to pass, be unclimbable, and use self-closing, self-latching gates that open away from the pool with the latch placed at least 60 inches above the ground. Above-ground pool walls themselves can count as part of the enclosure where the wall meets the height standard.
View full Carson rules →Key Facts Comparison
| Fact | Burbank | Carson |
|---|---|---|
| Height | 60 inches minimum | - |
| Gates | Self-closing, self-latching | - |
| Safety Features | Min 1 additional required | - |
| State Law | CA HSC 115920-115929 | - |
| Minimum fence height | - | 60 inches (Cal. HSC § 115923) |
| Max ground clearance under fence | - | 2 inches |
| Max gap size | - | Cannot allow passage of a 4-inch sphere |
| Gate | - | Self-closing, self-latching, opens away from pool; latch ≥60 in above grade |
| Climbability | - | Must have no handholds/footholds usable by a child under five |
Highlighted rows indicate differences between cities.
Burbank FAQ
What type of fence does my pool need in Burbank?
Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).
How tall must a pool fence be in Burbank?
Height: 60 inches minimum. Gates: Self-closing, self-latching. Safety Features: Min 1 additional required. State Law: CA HSC 115920-115929.
Carson FAQ
Can I use a chain-link fence as my pool barrier in Carson?
Chain-link can comply only if the mesh openings do not exceed the 4-inch sphere test in HSC § 115923. Most standard 2-inch mesh chain-link is compliant for the gap rule, but it can be climbable; many jurisdictions require slats or a smaller mesh to satisfy the climbability standard. Confirm with Carson Building & Safety before installation.
Does my existing house wall count as part of the pool barrier?
Yes — the house wall can serve as one side of the enclosure provided that any doors leading from the house to the pool area are equipped with an SB 442-compliant safety feature, such as an exit alarm (HSC § 115922(a)(4)) or self-closing/self-latching door device with release no lower than 54 inches above the floor (HSC § 115922(a)(5)).
Do hot tubs need the same 60-inch barrier?
Hot tubs and spas at single-family homes are subject to HSC § 115922, but a locking safety cover meeting ASTM F1346 (HSC § 115922(a)(3)) is the most common compliance path for spas in lieu of a full 60-inch enclosure.
Compare other topics
See how Burbank and Carson compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool