Skip to main content
CityRuleLookup

Burbank, CA Swimming Pools & Spas: Fencing & Safety Requirements (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Height
60 inches minimum
Gates
Self-closing, self-latching
Safety Features
Min 1 additional required
State Law
CA HSC 115920-115929

Summary

Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).

115923. An enclosure shall have all of the following characteristics:

(a) Any access gates through the enclosure open away from the swimming pool, and are self-closing with a self-latching device placed no lower than 60 inches above the ground.

(b) A minimum height of 60 inches.

(c) A maximum vertical clearance from the ground to the bottom of the enclosure of two inches.

(d) Gaps or voids, if any, do not allow passage of a sphere equal to or greater than four inches in diameter.

(e) An outside surface free of protrusions, cavities, or other physical characteristics that would serve as handholds or footholds that could enable a child below the age of five years to climb over.

Source: California Swimming Pool Safety Act - Enclosure and Barrier Requirements (HSC Art. 2.5)View official code

Full Breakdown

Burbank follows the California Pool Safety Act (SB 442) for pool fencing. Enclosures must be at least 60 inches high with no more than 2 inches of clearance at the bottom. No gaps may allow passage of a 4-inch sphere. Access gates must open away from the pool and be self-closing with self-latching devices at no lower than 60 inches. The exterior surface must be free of handholds or footholds that could enable a child under five to climb over. A dwelling wall may serve as part of the enclosure. All new or remodeled pools must also include at least 2 of 7 drowning prevention features.

Violations & Fines

Non-compliant pool fencing may result in fines, inspection failures, and liability exposure. Non-compliance during property sales triggers occupancy inspection issues.

Frequently Asked Questions

What type of fence does my pool need in Burbank?
Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).
How tall must a pool fence be in Burbank?
Height: 60 inches minimum. Gates: Self-closing, self-latching. Safety Features: Min 1 additional required. State Law: CA HSC 115920-115929.

Sources & Official References

Other rules in Burbank

All Burbank rules

California rules heatmap·Compare Burbank to another location·View the California swimming pools & spas overview

Get notified when Fencing & Safety Requirements in Burbank, CA changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.

Fencing & Safety Requirements in Nearby Cities

How other cities in Los Angeles County handle fencing & safety requirements.

Lakewood, CA
Some Restrictions
Lancaster, CA
Some Restrictions
Palmdale, CA
Some Restrictions
Norwalk, CA
Some Restrictions
Pomona, CA
Some Restrictions
Santa Monica, CA
Some Restrictions
Downey, CA
Some Restrictions
Inglewood, CA
Some Restrictions