Fencing Requirements: Burbank vs South Gate
How do fencing requirements rules compare between Burbank, CA and South Gate, CA?
Burbank and South Gate have similar restriction levels.
Burbank, CA
Los Angeles County
Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).
View full Burbank rules →South Gate, CA
Los Angeles County
Pool barriers in South Gate are governed by California Building Code Chapter 31 / California Residential Code Appendix V (adopted via South Gate Municipal Code Chapter 9.02) and by California Health and Safety Code §115923, which set the dimensional standard for any enclosure used to satisfy the Swimming Pool Safety Act. The enclosure must be at least 60 inches (5 feet) high measured from the outside finished grade, have a maximum vertical clearance from grade of 2 inches, and contain no openings through which a 4-inch diameter sphere may pass. Gates must be self-closing and self-latching, must open away from the pool, and the latch release must be located on the pool side of the gate at least 60 inches above the ground.
View full South Gate rules →Key Facts Comparison
| Fact | Burbank | South Gate |
|---|---|---|
| Height | 60 inches minimum | - |
| Gates | Self-closing, self-latching | - |
| Safety Features | Min 1 additional required | - |
| State Law | CA HSC 115920-115929 | - |
| Minimum Height | - | 60 inches (5 feet) from outside grade - HSC 115923(a)(1) |
| Max Ground Clearance | - | 2 inches below bottom of barrier |
| Opening Limit | - | No 4-inch sphere may pass through |
| Gate Hardware | - | Self-closing, self-latching, opens away from pool; latch 60+ in. above ground |
| Chain-Link Mesh | - | Max 1-3/4 inch openings (or slatted) |
Highlighted rows indicate differences between cities.
Burbank FAQ
What type of fence does my pool need in Burbank?
Pool fencing must be at minimum 60 inches tall per CA Building Code Title 24. Self-closing, self-latching gates required. At least one additional safety feature mandatory under CA Swimming Pool Safety Act (HSC 115920-115929).
How tall must a pool fence be in Burbank?
Height: 60 inches minimum. Gates: Self-closing, self-latching. Safety Features: Min 1 additional required. State Law: CA HSC 115920-115929.
South Gate FAQ
Can my house wall serve as one side of the pool enclosure?
Only if the dwelling-side openings (doors and operable windows) leading to the pool are protected by one of the other approved SB 442 features such as exit alarms (HSC §115922(b)(4)) or self-closing/self-latching doors with a release 54+ inches above the floor (HSC §115922(b)(5)). Otherwise the enclosure must isolate the pool from the home.
Does an above-ground pool need fencing if the pool wall itself is 60 inches tall?
Yes, the pool wall can serve as the barrier only if it meets all HSC §115923 criteria (no 4-inch openings, no climbable features within 36 inches), and any ladder or steps must be removable, lockable, or surrounded by a compliant barrier.
Compare other topics
See how Burbank and South Gate compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool