Pool Barriers: Carlsbad vs Oceanside
How do pool barriers rules compare between Carlsbad, CA and Oceanside, CA?
Carlsbad and Oceanside have similar restriction levels.
Carlsbad, CA
San Diego County
CA Swimming Pool Safety Act: 60-in barriers, self-closing/latching gates. New pools: 2 of 7 safety features. ASTM F1346 cover exempts spas.
View full Carlsbad rules →Oceanside, CA
San Diego County
All swimming pools in Oceanside must have safety barriers at least 60 inches high with self-closing, self-latching gates per California Health & Safety Code section 115920 and the building code. At least two of seven approved safety features are required.
View full Oceanside rules →Key Facts Comparison
| Fact | Carlsbad | Oceanside |
|---|---|---|
| Height | 60 in minimum | - |
| Gate | Self-closing/latching | - |
| Features | 2 of 7 (new pools) | - |
| Spa Exempt | ASTM F1346 cover | - |
| State Law | H&S §115920 | CA HSC §115920 |
| Barrier Height | - | 60 inches (5 ft) minimum |
| Gate Latch | - | 54 inches from ground on pool side |
| Safety Features | - | Minimum 2 of 7 required |
| Openings | - | Must not pass 4-inch sphere |
Highlighted rows indicate differences between cities.
Carlsbad FAQ
Fence height?
60 inches minimum.
Safety features?
New pools: barrier + 2 of 7 features.
Hot tub exempt?
With ASTM F1346 cover.
Oceanside FAQ
What pool fencing does Oceanside require?
Pool barriers must be at least 60 inches high with self-closing, self-latching gates. At least two of seven approved safety features must be in place.
When must pool barriers be installed?
Barriers must be in place before the pool is filled with water. The building department inspects barriers as part of the permit process.
Does a safety cover count as a barrier?
A safety cover meeting ASTM F1346 standards counts as one of the two required safety features.
Compare other topics
See how Carlsbad and Oceanside compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool