Pool Permits: Clovis vs Selma
How do pool permits rules compare between Clovis, CA and Selma, CA?
Clovis and Selma have similar restriction levels.
Clovis, CA
Fresno County
Clovis Building Division requires combined permits (building, electrical, plumbing) for all new pools/spas. Plan check, soils report for large pools, final inspection before filling. Typical fees $800-$2,500 depending on pool size/scope.
View full Clovis rules →Selma, CA
Fresno County
Swimming pool construction in Selma requires a building permit from the Selma Building Department. All pools must comply with the California Building Code, including the Swimming Pool Safety Act barrier requirements, electrical bonding standards, and plumbing code provisions for drainage and water supply connections.
View full Selma rules →Key Facts Comparison
| Fact | Clovis | Selma |
|---|---|---|
| Department | Clovis Building Division | - |
| Inspections | 4-5 phases | - |
| T24 | Variable-speed pump | - |
| Fees | $800-$2,500 | - |
| Permit Required | - | Yes, from Building Department |
| Barrier Height | - | Minimum 60 inches |
| Safety Features | - | At least 2 required by state law |
| Gate Standard | - | Self-closing and self-latching |
| Contact | - | Selma Building Dept (559) 891-2200 |
Highlighted rows indicate differences between cities.
Clovis FAQ
How do I get a pool permit in Clovis?
Submit plans to Clovis Building Division (1033 Fifth St). Expect plan check, 4-5 inspections, and T24-compliant variable-speed pump.
What inspections are required for a Clovis pool build?
Typical phases are pre-gunite (steel and plumbing), pre-deck, electrical bonding, and final before filling. Each must pass before the next phase begins.
Does Clovis require a variable-speed pool pump?
Yes. California Title 24 energy code mandates a two-speed or variable-speed pump on any new residential pool built in Clovis. Single-speed pumps will fail plan check.
Selma FAQ
Do I need a permit to build a pool in Selma?
Yes. A building permit from the Selma Building Department is required for all in-ground and above-ground swimming pools, spas, and hot tubs. Plans must show setbacks, barriers, and equipment placement.
What pool safety features does California require in Selma?
The Swimming Pool Safety Act requires at least two approved safety features such as pool fencing at least 60 inches tall, self-closing gates, pool covers, exit alarms, or self-locking doors providing access to the pool area.
How much does a pool permit cost in Selma?
Permit fees are calculated based on the project valuation after the Building Department reviews the plans. Contact the department at (559) 891-2200 for a fee estimate.
Compare other topics
See how Clovis and Selma compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool