Hot Tub Rules: Clovis vs Selma
How do hot tub rules rules compare between Clovis, CA and Selma, CA?
Clovis and Selma have similar restriction levels.
Clovis, CA
Fresno County
Hot tubs/spas with a lockable safety cover (ASTM F1346) are exempt from the CA pool barrier requirement per CA H&S §115921(b). Clovis building/electrical permits still required for installation.
View full Clovis rules →Selma, CA
Fresno County
Hot tubs in Selma need ASTM F1346 safety covers or pool barriers. Electrical permits and GFCI protection required. Spa water must drain to sanitary sewer.
View full Selma rules →Key Facts Comparison
| Fact | Clovis | Selma |
|---|---|---|
| Cover Exemption | ASTM F1346 | - |
| State Law | CA H&S §115921(b) | - |
| Electrical Permit | Required | - |
| NEC | §680.42 | - |
| Safety Cover Standard | - | ASTM F1346 |
| Electrical Requirement | - | Dedicated 240V GFCI circuit |
| Permit Required | - | Yes, for electrical work |
| Water Discharge | - | Sanitary sewer only (not storm drain) |
Highlighted rows indicate differences between cities.
Clovis FAQ
Do I need a pool fence around my hot tub in Clovis?
Not if your spa has an ASTM F1346 locked safety cover. CA H&S §115921(b) exempts covered spas from the 60" barrier rule.
Do I need an electrical permit for a hot tub in Clovis?
Yes. The 240V circuit must be GFCI-protected and bonded per NEC §680.42, which requires a Clovis electrical permit and final inspection.
Can my hot tub pump violate Clovis noise rules?
Yes. Spa pump noise must stay under the CMC Ch. 5.24 limits — 55 dBA at night and 65 dBA during the day at the property line. Neighbors can file a noise complaint on chronic hum.
Selma FAQ
Do I need a fence around my hot tub in Selma?
Not necessarily. If your hot tub has a locking safety cover meeting ASTM F1346 standards, the cover can serve as one of the two required drowning prevention features. You would need one additional approved feature such as a door alarm or pool alarm.
Do I need a permit to install a hot tub in Selma?
Yes. Electrical work for hot tubs requires a building permit from the City of Selma. A dedicated 240-volt GFCI-protected circuit must be installed by a licensed electrician. Contact the Building Department at (559) 891-2208.
Where can I drain my hot tub water in Selma?
Chemically treated hot tub water must be discharged to the sanitary sewer system, not to the ground, gutter, or storm drain. Discharging to the storm drain violates Fresno County stormwater regulations.
Compare other topics
See how Clovis and Selma compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool