Hot Tub Rules: Des Plaines vs Orland Park
How do hot tub rules rules compare between Des Plaines, IL and Orland Park, IL?
Des Plaines and Orland Park have similar restriction levels.
Des Plaines, IL
Cook County
Hot tubs and spas in Des Plaines require a building and electrical permit. They must be installed by a licensed electrician with GFCI protection and proper bonding. Hot tubs equipped with a locked or compliant safety cover meeting ASTM F1346 are typically exempt from the perimeter fence requirement applicable to swimming pools.
View full Des Plaines rules →Orland Park, IL
Cook County
Hot tubs and spas in Orland Park require a building permit when installed as a permanent fixture. Electrical work must meet NEC requirements with GFCI protection and a disconnect. A safety cover meeting ASTM F1346 exempts the hot tub from the pool barrier requirement. Setback rules apply.
View full Orland Park rules →Key Facts Comparison
| Fact | Des Plaines | Orland Park |
|---|---|---|
| Permit | Building & electrical | Required for permanent install |
| GFCI | Required | - |
| Disconnect | Within sight | - |
| Cover | ASTM F1346 acceptable | - |
| Setbacks | 5 ft typical | - |
| Electrical | - | 240V GFCI dedicated circuit |
| Safety Cover | - | ASTM F1346 exempts barrier |
| Setback | - | 3-5 ft from property lines |
| Weight | - | 5,000+ lbs when filled |
Highlighted rows indicate differences between cities.
Des Plaines FAQ
Do I need a permit for a hot tub in Des Plaines?
Yes. Hot tubs and spas, including portable plug-in models, require a building and electrical permit from the Department of Community and Economic Development.
Do I need a fence around my hot tub?
Generally no, if the hot tub is equipped with a locked or compliant safety cover meeting ASTM F1346. Without such a cover, the standard 4-foot pool barrier requirement applies.
Can I plug a hot tub into a regular outlet?
Most hot tubs require a dedicated 240-volt circuit with GFCI protection installed by a licensed electrician. Plug-in 120-volt models still require GFCI protection and a permit.
Orland Park FAQ
Do I need a permit for a hot tub in Orland Park?
Yes for permanent installations. Portable plug-in spas may be exempt, but most hot tubs require a dedicated 240V GFCI circuit and permanent electrical work requires a permit and licensed electrician.
Do I need a fence around my hot tub?
Not if the spa has a locking safety cover meeting ASTM F1346. Without such a cover, the hot tub requires the same 48-inch barrier as a swimming pool.
Can I put a hot tub on my deck?
Yes, but account for the 5,000+ pound weight when filled. An engineering review may be required to confirm the deck can support the load. Permits cover structural review.
Compare other topics
See how Des Plaines and Orland Park compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool