Skip to main content
CityRuleLookup
🌍 Environmental Rules/Erosion Control

Erosion Control: Grand Prairie vs Irving

How do erosion control rules compare between Grand Prairie, TX and Irving, TX?

Irving has fewer restrictions than Grand Prairie.

Grand Prairie, TX

Dallas County

Heavy Restrictions

Grand Prairie requires erosion control measures for all development. Erosion hazard setbacks must be delineated on subdivision plats. The city's erosion control standards apply to all land-disturbing activities.

View full Grand Prairie rules β†’

Irving, TX

Dallas County

Some Restrictions

Irving requires erosion and sediment control measures for all grading and construction activities. The Land Development Code requires an erosion control plan with best management practices including silt fences, inlet protection, and stabilized construction entrances. Sites must maintain erosion controls until final stabilization with 70% vegetation coverage or permanent ground cover.

View full Irving rules β†’

Key Facts Comparison

FactGrand PrairieIrving
PermitEarthwork permit required-
BMPsErosion/sediment control required-
1+ AcreTPDES permit from TCEQ-
PlatsErosion setbacks required-
Requirement-Erosion control plan for all construction
BMPs Required-Silt fences, inlet protection, stabilized entrances
Stabilization-70% vegetation or permanent cover required
Inspection-City inspectors verify compliance
TCEQ Oversight-State environmental agency enforces TPDES

Highlighted rows indicate differences between cities.

Grand Prairie FAQ

What erosion control is required in Grand Prairie?

All land-disturbing activities require erosion and sediment control BMPs. Clearing/Earthwork permits required. Sites over 1 acre need a TPDES permit.

Are there erosion setbacks?

Yes. Erosion hazard setbacks must be delineated on subdivision plats per the UDC.

Irving FAQ

Do I need an erosion control plan for my Irving project?

Yes, all construction and grading activities in Irving require erosion and sediment control measures. The scope of the plan depends on the project size and its proximity to waterways.

What happens if erosion controls fail?

The city may issue stop-work orders, require corrective action, and assess penalties. Sediment discharges to the storm drain system or waterways can also trigger state enforcement from TCEQ.

Want to add a third city?

Use our full comparison tool to compare up to three cities.

Open Comparison Tool