Shed Rules: Livermore vs San Leandro
How do shed rules rules compare between Livermore, CA and San Leandro, CA?
Livermore and San Leandro have similar restriction levels.
Livermore, CA
Alameda County
Sheds under 120 sq ft in Livermore don't require a building permit. Setbacks typically 3-5 ft from side/rear property lines; no electrical/plumbing without permit.
View full Livermore rules →San Leandro, CA
Alameda County
Sheds under 120 sq ft need no building permit in San Leandro but must meet zoning setbacks. Larger sheds require permits and rear/side setback compliance.
View full San Leandro rules →Key Facts Comparison
| Fact | Livermore | San Leandro |
|---|---|---|
| Permit Exempt | ≤120 sq ft | - |
| Max Height | 12 ft | - |
| Setback | 3-5 ft typical | 3-5 ft typical |
| Utilities | Trigger permit | Trigger permit |
| HOA | May restrict | - |
| No Permit | - | Under 120 sq ft |
| Height | - | ~15 ft max |
| Sleeping | - | Prohibited |
Highlighted rows indicate differences between cities.
Livermore FAQ
Do I need a permit for a 10x12 shed in Livermore?
Yes. 120 sq ft is the state exemption cap; a 10x12 (120 sq ft) is borderline and anything larger requires a building permit.
Can I run power to my shed without a permit?
No. Electrical or plumbing to a shed requires an electrical/plumbing permit from Livermore Building Division.
San Leandro FAQ
Do I need a permit for a 10x10 shed in San Leandro?
A 10x10 shed is 100 sq ft, so no building permit, but it must meet setback rules and cannot have plumbing.
Who enforces this in San Leandro?
San Leandro code enforcement at (510) 577-3394 handles most complaints. Alameda County agencies handle regional issues.
Compare other topics
See how Livermore and San Leandro compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool