Pool Barriers: Menifee vs Palm Springs
How do pool barriers rules compare between Menifee, CA and Palm Springs, CA?
Menifee and Palm Springs have similar restriction levels.
Menifee, CA
Riverside County
Pool barriers in Menifee are governed by the California Swimming Pool Safety Act, Health & Safety Code §115920 et seq., as amended by SB 442 (effective January 1, 2018). New residential pools and spas, and remodels requiring permits, must include at least TWO of seven approved drowning-prevention features. Menifee Building & Safety enforces these requirements at plan check and final inspection through MMC Title 15 (adoption of the California Building Code).
View full Menifee rules →Palm Springs, CA
Riverside County
Palm Springs enforces California Building Code Appendix V and Health & Safety Code §115920–115929 (the Swimming Pool Safety Act) requiring barriers at least 60 inches tall with self-closing, self-latching gates and at least two approved drowning-prevention safety features for any new or remodeled pool or spa. Permits and inspections are required through Palm Springs Building and Safety.
View full Palm Springs rules →Key Facts Comparison
| Fact | Menifee | Palm Springs |
|---|---|---|
| Governing law | Cal. HSC §115920-115929 (SB 442 dual-feature requirement) | - |
| Required features | At least 2 of 7 approved drowning-prevention features | - |
| Perimeter fence | 60 inches min, max 4-inch openings, max 2 inches above grade (§115923) | - |
| Gates | Self-closing, self-latching, opening outward away from pool | - |
| Local enforcement | Menifee Building & Safety per MMC Title 15 / CBC | - |
| Inspection | Required before final pool/spa approval | - |
| - | - |
Highlighted rows indicate differences between cities.
Menifee FAQ
Does my new pool in Menifee need a fence?
Not necessarily a fence specifically, but you must install at least two of seven approved features under HSC §115922 (SB 442). One option is a 60-inch perimeter fence with self-closing/self-latching gate per §115923; alternatives include door/window alarms, safety covers, and ASTM-compliant water alarms.
How high must a pool fence be in California?
Minimum 60 inches in height under HSC §115923 if you choose the perimeter-enclosure option. The fence cannot have more than 2 inches above grade, openings must not allow a 4-inch sphere, and gates must self-close/self-latch and open outward away from the pool.
Do I need a permit to modify pool barriers?
Yes. Menifee Building & Safety reviews pool/spa permits including the barrier compliance per MMC Title 15 and CBC. Final inspection verifies the two SB 442 features are operational.
Palm Springs FAQ
Compare other topics
See how Menifee and Palm Springs compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool