Retaining Walls: Pasadena vs South Gate
How do retaining walls rules compare between Pasadena, CA and South Gate, CA?
Pasadena and South Gate have similar restriction levels.
Pasadena, CA
Los Angeles County
Retaining walls up to 4 ft in Pasadena require a zoning permit. Taller retaining walls require a building permit and engineering. Hillside areas have additional design standards to blend structures into terrain per PMC Title 14 and Title 17.
View full Pasadena rules →South Gate, CA
Los Angeles County
Retaining walls in South Gate are regulated under Chapter 9.02 (Building Code), which adopts the California Building Code (Title 24). Walls retaining more than 4 feet of fill, measured from the bottom of footing to the top of wall, require a building permit and engineered design. Zoning setbacks and combined fence-on-wall height limits in Chapter 11.25 also apply.
View full South Gate rules →Key Facts Comparison
| Fact | Pasadena | South Gate |
|---|---|---|
| Zoning Permit | Up to 4 ft | - |
| Building Permit | Over 4 ft | - |
| Hillside | Enhanced design standards | - |
| Engineering | Required for taller walls | Licensed CA civil/structural engineer for permitted walls |
| Permit threshold | - | Retains >4 ft fill (bottom of footing to top of wall) |
| Code authority | - | South Gate MC Ch. 9.02 adopts CA Building Code (Title 24) |
| Zoning treatment | - | Combined wall + fence height counted as single structure under Ch. 11.25 |
Highlighted rows indicate differences between cities.
Pasadena FAQ
Do I need a permit for a retaining wall?
In Pasadena, walls over 4 feet typically require a building permit and engineered plans. Shorter walls may be exempt.
How close to the property line can I build a retaining wall?
Setback requirements vary. Check Pasadena zoning code for specific distances from property lines.
South Gate FAQ
Do I need a permit for a retaining wall?
Yes if the wall retains more than 4 feet of fill (measured from the bottom of the footing to the top of the wall) or if it supports a surcharge such as a driveway, pool, or upslope soil. South Gate adopts the California Building Code through Chapter 9.02.
Can I put a 6-foot fence on top of my retaining wall?
Possibly, but the combined height of the wall and the fence is treated as a single structure for South Gate's Chapter 11.25 height limit. A 4-ft retaining wall plus a 6-ft fence (10 ft total) would exceed the standard 6-ft side-yard limit and require a variance.
What engineering is required?
Walls over 4 feet need a stamped design from a California-licensed civil or structural engineer. The plans must address soil bearing, drainage, weep holes, and any surcharge load before South Gate Building & Safety will issue the permit.
Compare other topics
See how Pasadena and South Gate compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool