Permit Requirements: Reedley vs Selma

Building permits required for masonry walls and fences exceeding standard heights. Standard wood or vinyl fences at allowed heights may be exempt. Verify with the Building Division.

Standard residential fences up to six feet in Selma generally do not require a building permit under the California Building Code exemption for fences not exceeding 7 feet in height, as established in CBC Section 105.2. This means that typical wood, vinyl, chain-link, and wrought iron residential fences can be installed without obtaining a building permit from the Selma Building Division, provided they comply with the height, location, and material requirements of SMC 11-20-14. However, several types of fence and wall construction do require building permits, including masonry block walls, concrete walls, retaining walls that retain more than 4 feet of unbalanced fill, and any fence or wall that exceeds 7 feet in height. The 2024 Zoning Ordinance Update addresses fence and wall standards through the Community Development Department and introduces specific requirements for screening walls used to conceal RV and equipment storage. A six-foot solid masonry fence wall is required by the developer at the interface between areas zoned C (Commercial), M (Manufacturing), or R-O (Residential-Office) and any adjacent residential area for noise abatement, and this required masonry wall must be installed at the time of construction. Fence modifications near Highway 99 may require additional Planning Commission review.