Mead Valley, CA Swimming Pools & Spas: Pool Permits (2026)

Pool, spa, and hot tub installations are permitted and inspected by the County Building & Safety Department under the adopted 2025 California Residential Code (CRC), California Electrical, Mechanical, and Plumbing Codes, plus County Ordinance 421. Submittals require a legible site plan showing property lines, easements, setbacks, all structures, pool/equipment locations, electrical conductors and gas lines, and barrier details (form 284-004, Rev. 12/2025). Pool equipment and any pipes emerging from the ground must stay outside the 5-foot setback or require a planning variance. Designs are typically stamped by a California-licensed engineer, and structural calculations or a referenced approved permit number must be provided. Per Ordinance 421, Section 6, all plans must show compliance with codes in effect, and a pre-plaster inspection is required before plastering and filling. The handout describes a four-stage inspection sequence: (1) setbacks, footings, steel, plumbing, conduit and gas/water pressure tests; (2) equipotential bonding grid; (3) primary barrier and rough electrical; and (4) final and secondary barrier. The owner or agent must sign the Barrier Agreement and return it to the Building Official before the permit issues. Separate wall (BWL) permits are needed if a block wall is removed for equipment access.