Duluth UDC limits lot coverage (buildings and impervious surfaces) by zoning district. R-100 typically allows 35-40% maximum lot coverage including principal and accessory structures.
Lot coverage in Duluth is measured as the percentage of the lot area covered by structures, driveways, patios, and other impervious surfaces. R-100 (10,000 sq ft minimum lot) typically caps building coverage around 35%. Higher-density RM districts allow greater coverage. Impervious surface limits also relate to stormwater management under Gwinnett County/GAEPD rules. Exceeding coverage requires variance approval.
Plan review denial; if built without approval, structures may need to be removed to come into compliance.
Duluth, GA
Construction noise typical Duluth hours 7 AM-7 PM weekdays, 9 AM-6 PM Saturdays, prohibited Sundays and holidays. Emergency repairs exempt. Verify active hou...
Duluth, GA
Duluth Code of Ordinances Chapter 34 (Offenses) prohibits unreasonable noise audible beyond property lines. Quiet hours typically 11 PM-7 AM weekdays, midnig...
Duluth, GA
Abandoned vehicles regulated under state law GA Code Β§40-11-1+ (10 days on public property). Duluth Code Compliance enforces removal of inoperable or abandon...
Duluth, GA
RVs, boats, trailers, and campers may NOT be stored in front yards or driveways visible from the street in residential zones. Must be parked in rear yard, si...
Duluth, GA
Residential driveways must be paved (concrete, asphalt, or pavers) and meet zoning district setback requirements. Curb cuts require a permit from Duluth Publ...
Duluth, GA
Duluth residential fence height: 4 ft in front yard, 6 ft in rear/side yards. Corner lots have visibility triangle restrictions (typically 3 ft max within 25...
Side-by-side rule comparisons with other cities in Gwinnett County.
See how other cities in Gwinnett County handle lot coverage limits.
See how Duluth's lot coverage limits rules stack up against other locations.
Quick Compare
Help us keep this page accurate. If you notice an error or outdated information, let us know.