Hackensack vs Ridgewood
How do setback rules rules compare between Hackensack, NJ and Ridgewood, NJ?
Ridgewood has fewer restrictions than Hackensack.
Hackensack, NJ
Bergen County
Hackensack establishes minimum front, side, and rear yard setbacks that vary by zoning district. Single-family residential zones typically require larger yards than multifamily or commercial zones. Setbacks govern placement of principal buildings, accessory structures, and additions like decks or garages.
View full Hackensack rules →Ridgewood, NJ
Bergen County
Ridgewood Chapter 190 sets minimum front, side, and rear yard setbacks that vary by residential zone district, with all yard setbacks measured perpendicular to the lot lines and front yards spanning the lot's full width.
View full Ridgewood rules →Key Facts Comparison
| Fact | Hackensack | Ridgewood |
|---|---|---|
| Districts | R-1, R-2, R-3, commercial | - |
| Typical front setback | 25-30 feet residential | - |
| Typical side yard | 6-10 feet residential | - |
| Variances | Zoning Board of Adjustment | - |
| Accessory rules | Separate setbacks apply | - |
| Code section | - | Chapter 190 zoning |
| Zones | - | R-75, R-100, R-110, R-125 |
| Measurement | - | Perpendicular to lot lines |
| Front yard | - | Full lot width |
Highlighted rows indicate differences between cities.
Hackensack FAQ
How do I find the setback for my Hackensack property?
Identify your zoning district through the Hackensack zoning map, then check the bulk standards table in the zoning chapter for that district's specific front, side, and rear setback requirements.
Can I get a variance to build closer to my property line in Hackensack?
Yes, but you must apply to the Zoning Board of Adjustment and demonstrate hardship. Approval is discretionary and requires public notice and a hearing.
Ridgewood FAQ
What are the front yard setbacks in Ridgewood?
Front yard depths vary by zone, ranging from roughly 30 to 50 feet across R-75 through R-125 districts. Confirm exact values in the Lot and Bulk Standards table for your zone.
How are setbacks measured in Ridgewood?
All required yard setbacks are measured perpendicular from the applicable lot line to the nearest point of the principal building, in accordance with Chapter 190 definitions.
Compare other topics
See how Hackensack and Ridgewood compare on other ordinance categories.
Want to add a third city?
Use our full comparison tool to compare up to three cities.
Open Comparison Tool