5 rules for unincorporated Richmond County, New York.
Verified from official government sources
Staten Island pool installations require NYC DOB permits under NYC Building Code §3109 (Chapter 31). All in-ground pools and above-ground pools over 24 inches deep need plan review. Shared/building pools also need NYC DOHMH permits under NYC Health Code Article 165.
Staten Island pool barriers must comply with NYC Building Code §3109.2 and NY State Residential Code §AG105 — minimum 48-inch (4-foot) barrier, self-closing and self-latching gates, and no climbable surfaces within 48 inches. Shared pools face stricter DOHMH requirements.
Staten Island pools must comply with the federal Virginia Graeme Baker Pool & Spa Safety Act (anti-entrapment drain covers), NYC Building Code §3109, and NY Gen Business Law §399-aaa (pool safety cover act). Shared/building pools follow NYC Health Code Article 165.
Staten Island above-ground pools over 24 inches deep or holding over 5,000 gallons require a NYC DOB permit per Building Code §3109 and Appendix G. Must meet R3/R4 zoning yard setbacks (typically 10 ft rear, 5 ft side), GFCI electrical per NEC Article 680, and NYS pool alarm rule (Exec. Law §378(5-b)).
Staten Island hot tubs and spas require a NYC DOB electrical permit (Admin Code §27-3017) for the 240V/50A GFCI circuit per NEC Article 680.42. Portable spas with ASTM F1346 safety covers are exempt from fence requirements under NYC BC Appendix G §AG105.5; structural review required for rooftop/deck installations.
See every category we cover for Richmond County — parking, noise, fences, fires, animals, pools, and more.
Richmond County Ordinance Hub →