Hot tubs and spas with safety cover meeting ASTM F1346 are exempt from pool barrier requirements under FL 515.29. Permit required for installation.
Per FL 515.29, spas and hot tubs equipped with an ASTM F1346-compliant safety cover are exempt from barrier fencing. Building permit required for electrical and plumbing connections (approximately 150). 240V spas require dedicated GFCI circuit with disconnect within sight but at least 5 feet from water. Bonding to equipotential grid required. Hot tubs over 150 gallons considered pools if no ASTM cover.
No safety cover and no barrier: FL 515 violation, 500 fine. Unpermitted electrical: failed inspection and corrective action.
Riverview, FL
Riverview is unincorporated Hillsborough County. Noise is governed by County Code Chapter 36 (Article VI, Division 2 — Sections 36-429 et seq.), administered...
Hillsborough County, FL
Hillsborough County Animal Control Ordinance treats continuous barking over 10 minutes, or intermittent barking over 30 minutes, as a public nuisance enforce...
Hillsborough County, FL
Construction noise in unincorporated Hillsborough County is restricted to 7 AM through 7 PM Monday to Saturday, with no Sunday or legal holiday work except f...
Hillsborough County, FL
Hillsborough County has no leaf-blower-specific ordinance. Gas blowers are allowed during construction/landscape hours (7 AM to 7 PM) and must not exceed gen...
Hillsborough County, FL
In unincorporated Hillsborough County, retaining walls are regulated under Land Development Code Part 6.07.00 (Fences and Walls) for setback and dimensional ...
Hillsborough County, FL
Corner lots in Hillsborough County must maintain a sight visibility triangle: no fence, wall, or landscaping over 30 inches within 25 feet of the intersectin...
Side-by-side rule comparisons with other cities in Hillsborough County.
See how other cities in Hillsborough County handle hot tub rules.
See how Riverview's hot tub rules rules stack up against other locations.
Quick Compare
Help us keep this page accurate. If you notice an error or outdated information, let us know.