Showing ordinances that apply to Ten Mile Creek, MD
Ten Mile Creek is an unincorporated community (population 1,012) in Montgomery County, Maryland. Because Ten Mile Creek is not an incorporated city, it does not have its own municipal code. Instead, Montgomery County ordinances apply directly to properties here. The hot tub rules rules below are the ones that govern your area.
Portable plug-in hot tubs on existing surfaces need no building permit in MoCo. A locking ASTM F1346 cover substitutes for the 48-inch barrier requirement.
Montgomery County regulates hot tubs and spas under the county building code and NEC Article 680. A portable hot tub or spa placed on an existing patio, deck, or concrete pad and plugged into a dedicated GFCI-protected outlet does not typically require a building permit. However, if the spa requires hardwired electrical service (240V), an electrical permit and inspection by DPS are mandatory. Outdoor hot tubs must comply with pool barrier requirements under IRC Appendix G unless they are equipped with a locking safety cover that meets ASTM F1346 standards and is kept locked when the spa is not in use. A compliant safety cover acts as a substitute for the 48-inch barrier. Built-in or in-ground spas require a building permit and are treated the same as in-ground pools for permitting purposes. Gas-fired spa heaters require a mechanical permit and must comply with fuel gas piping codes. Indoor spas may require ventilation modifications to prevent moisture damage and must have GFCI protection. Community or HOA spas must also comply with COMAR 10.17.01 for public spa sanitation and safety.
Unpermitted electrical installations for hot tubs may be flagged during property resale inspections. DPS can require retroactive permitting. Non-compliant spa barriers or covers expose the homeowner to liability.
See how Ten Mile Creek's hot tub rules rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.