Showing ordinances that apply to Hillandale CDP (part), Montgomery County, Maryland, MD
Hillandale CDP (part), Montgomery County, Maryland is an unincorporated community (population 3,508) in Montgomery County, Maryland. Because Hillandale CDP (part), Montgomery County, Maryland is not an incorporated city, it does not have its own municipal code. Instead, Montgomery County ordinances apply directly to properties here. The structure height limits rules below are the ones that govern your area.
Montgomery County limits residential building height to 35 feet in most single-family zones under the zoning ordinance Chapter 59. Height is measured from the average finished grade to the highest point of the roof. Some commercial and mixed-use zones allow greater heights.
Under Montgomery County Zoning Ordinance Chapter 59, most single-family residential zones (R-200, R-90, R-60, R-40) limit building height to 35 feet measured from the average finished grade at the building perimeter to the highest point of the roof. Chimneys, antennas, and rooftop mechanical equipment may extend above the 35-foot limit by a specified amount. In planned development zones and mixed-use areas such as those around Bethesda, Silver Spring, and White Flint, maximum heights can range from 50 to over 200 feet depending on the master plan and density provisions. Accessory structures are generally limited to 20 feet in height. The compatibility standards in Chapter 59 require buildings near single-family zones to step down in height to reduce visual and shadow impacts. The Department of Permitting Services reviews height compliance as part of the building permit process.
Exceeding the height limit without approval is a zoning violation. The Department of Permitting Services can issue stop-work orders. Correction may require reducing the height of the structure at the owners expense.
See how Hillandale CDP (part), Montgomery County, Maryland's structure height limits rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.