Showing ordinances that apply to Derwood, MD
Derwood is an unincorporated community (population 2,535) in Montgomery County, Maryland. Because Derwood is not an incorporated city, it does not have its own municipal code. Instead, Montgomery County ordinances apply directly to properties here. The pool barriers rules below are the ones that govern your area.
Montgomery County requires pool barriers of at least 48 inches with self-closing, self-latching gates under DPS building code enforcement. All swimming pools must comply with Maryland COMAR 05.02.11 barrier standards. DPS inspection required before pool use.
Montgomery County enforces pool barrier requirements through DPS under the International Residential Code (IRC) as adopted by Maryland. All residential swimming pools, hot tubs, and spas with water depth over 24 inches must be enclosed by a barrier at least 48 inches high measured from the finished grade on the exterior side. Gates must be self-closing and self-latching, with latches at least 54 inches above grade or on the pool side of the gate. Barrier openings must not allow passage of a 4-inch sphere. The house wall may serve as one side of the barrier if all doors to the pool area have alarms or self-closing mechanisms. Aboveground pools with walls 48 inches or higher satisfy the barrier requirement if ladders are removable or lockable. Maryland COMAR 05.02.11 sets the state minimum standards. DPS requires a barrier inspection before issuing a final pool occupancy approval. Mesh pool safety covers meeting ASTM F1346 may supplement but not replace permanent barriers.
DPS stop-work order for non-compliant pool construction. Failure to maintain barriers: civil citation $500 per violation. Pool without required barrier: immediate correction order. Liability exposure for drowning incidents without code-compliant barriers.
See how Derwood's pool barriers rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.