Decks not exceeding 200 square feet and not more than 30 inches above grade are generally exempt from permits in unincorporated King County. Larger or elevated decks require building permits. Concrete patios at grade do not require permits. Decks in flood zones or critical areas have additional requirements.
Under the Washington State Building Code as adopted by King County, decks are exempt from building permits if they meet all of the following: floor area does not exceed 200 square feet, the deck is not more than 30 inches above grade at any point, and the deck does not serve a required exit door. Decks exceeding any of these thresholds require a building permit from King County's Department of Local Services, with plans showing structural details, footings, guard rails (required for decks over 30 inches above grade β minimum 36 inches tall per Washington code), and setback compliance. Attached decks that connect structurally to the primary dwelling typically require permits regardless of size due to the structural connection. Concrete slab patios at grade level generally do not require building permits. Covered patios and pergolas may require permits depending on size and attachment method. In flood hazard areas (mapped by FEMA), decks may need to be constructed to flood-resistant standards and elevated above the base flood elevation. King County's critical areas regulations (KCC 21A.24) may affect deck construction near wetlands, streams, and steep slopes β any development in critical area buffers requires additional review and potentially a critical areas alteration permit. The Pacific Northwest's rain demands proper flashing, drainage, and rot-resistant materials (cedar or pressure-treated lumber).
Building a deck without a required permit violates King County building code. Penalties include stop-work orders, retroactive permit requirements, and potential demolition of non-compliant work. Decks in critical areas without proper permits face additional environmental enforcement.
Kent, WA
Kent decibel limits follow WAC 173-60 and KCC 8.05 using EDNA zones. Residential receiving limit is 55 dBA day and 45 dBA night. Commercial sources are cappe...
Kent, WA
Kent industrial sources are capped at 70 dBA day and 65 dBA night at another industrial property, but only 60 dBA day and 50 dBA night when received at a res...
Kent, WA
Commercial trucks over 10,000 pounds GVWR generally cannot park on Kent residential streets except for active loading. Warehouse districts and truck routes h...
Kent, WA
Kent follows Washington State Building Code EV-ready requirements for new multifamily and commercial buildings. Public chargers exist at Kent Station and sev...
Kent, WA
Kent driveway aprons require Public Works approval under KCC Title 6. New or widened driveways need a right-of-way construction permit, and vehicles must not...
Kent, WA
Kent has no city requirement to split shared fence costs with a neighbor. Washington common law controls boundary fences. Survey the property line before bui...
Side-by-side rule comparisons with other cities in King County.
See how Kent's deck & patio permits rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.