Showing ordinances that apply to Ormond-by-the-Sea, FL
Ormond-by-the-Sea is an unincorporated community (population 7,312) in Volusia County, Florida. Because Ormond-by-the-Sea is not an incorporated city, it does not have its own municipal code. Instead, Volusia County ordinances apply directly to properties here. The hot tub rules rules below are the ones that govern your area.
Volusia County requires building and electrical permits for hot tub installation. Florida Pool Safety Act (FL §515) applies if barrier bypassed. Locking safety cover meeting ASTM F1346 satisfies barrier requirement.
Volusia County Code and the Florida Building Code regulate hot tub and spa installations. An electrical permit is required for the dedicated 240V circuit with GFCI protection per NEC Article 680. Structural review may be needed for deck-mounted installations since filled spas weigh 3,000-5,000 lbs. Under FL §515.27 (Residential Swimming Pool Safety Act), hot tubs and spas qualify as pools and must have one of the qualifying safety features; however, a power safety cover meeting ASTM F1346 satisfies the barrier requirement without requiring a fence. This is the most common compliance path for hot tubs in Volusia. Setback requirements typically 5-10 feet from property lines per local zoning. Coastal installations in Daytona Beach, Ormond, NSB, and Ponce Inlet may require CCCL review under FL §161.053 if seaward of the control line. Drainage must not discharge to neighboring property or storm drains under SJRWMD rules. Indoor spa rooms require exhaust ventilation per FBC Mechanical.
Unpermitted electrical work: stop-work, fines $200-$500. FL §515 barrier violations: 2nd-degree misdemeanor, 60 days jail, $500 fine. Improper drainage: SJRWMD enforcement. Structural failure: civil liability for injury.
See how Ormond-by-the-Sea's hot tub rules rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.