Showing ordinances that apply to Port Washington, NY
Port Washington is an unincorporated community (population 16,753) in Nassau County, New York. Because Port Washington is not an incorporated city, it does not have its own municipal code. Instead, Nassau County ordinances apply directly to properties here. The hot tub rules rules below are the ones that govern your area.
Hot tubs and spas over 24 inches deep require building and electrical permits in Nassau County. Lockable safety covers meeting ASTM F1346 satisfy barrier requirements in lieu of fencing.
Portable spas with ASTM F1346 compliant locking covers are exempt from the 48-inch fence requirement under NY Residential Code Appendix G. Hardwired electrical installation requires licensed electrician and GFCI per NEC 680.42. Local inspections verify cover installation. Setback from structures typically 5 feet. Water temperature should not exceed 104F per industry standards.
Unpermitted installation: $250-$1,000 fines. Missing or defective safety cover: barrier violation with $500+ penalty.
See how Port Washington's hot tub rules rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.