Showing ordinances that apply to Village Shires, PA
Village Shires is an unincorporated community (population 3,946) in Bucks County, Pennsylvania. Because Village Shires is not an incorporated city, it does not have its own municipal code. Instead, Bucks County ordinances apply directly to properties here. The hot tub rules rules below are the ones that govern your area.
Bucks County hot tub installations require electrical and often building permits under the PA UCC. Barrier requirements apply unless a locking safety cover per ASTM F1346 is used.
Hot tubs and spas in Bucks County are regulated under the PA Uniform Construction Code, adopting IRC Appendix V / ISPSC. Electrical permits are required for 240V GFCI-protected circuits (NEC Article 680); typical permit cost $75 to $150. Building permits may be required for elevated platforms or structural modifications. Under ISPSC §305, the pool barrier requirement applies unless the spa has a safety cover listed to ASTM F1346 (rigid cover capable of supporting 400 lbs). Setbacks from property lines typically 5 to 10 feet depending on township zoning. Plumbing drainage must not discharge to neighboring property, sidewalks, or storm drains; gray-water discharge to sanitary sewer requires utility authorization. Indoor spas require dedicated ventilation per IMC §401.5. Homeowner insurance riders commonly required.
Unpermitted electrical: stop-work, retroactive permit plus double fee, fines $200 to $500. No safety cover and no barrier: code enforcement notice and use prohibition until corrected. Improper drainage: PA DEP or township stormwater citation.
See how Village Shires's hot tub rules rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.