North Carolina building code requires permits and engineering review for retaining walls over four feet in height.
The North Carolina Residential Code, adopted under N.C.G.S. 143-138, requires a building permit for any retaining wall exceeding four feet in height measured from the bottom of the footing to the top of the wall, or for walls supporting surcharge loads. Walls over four feet generally require sealed engineering plans by a licensed professional engineer under N.C.G.S. 89C. Erosion and sediment control requirements under N.C.G.S. 113A-50 also apply during construction.
Unpermitted retaining walls may require removal, retroactive engineering certification, and trigger civil penalties under both building code and erosion control statutes.
Matthews, NC
Vehicle noise in Matthews is regulated under state law N.C.G.S. 20-128 requiring functional mufflers, plus local provisions prohibiting loud exhaust, revving...
Matthews, NC
Matthews enforces nighttime quiet hours from 11 PM to 7 AM on weekdays and 11 PM to 8 AM on weekends under the Town Code noise provisions, with plainly audib...
Matthews, NC
Matthews does not have a leaf-blower-specific ordinance; operation is governed by general noise and construction-hour restrictions in the Town Code.
Matthews, NC
Construction activity in Matthews is generally permitted 7 AM to 7 PM Monday through Saturday with Sunday restrictions, consistent with Mecklenburg County co...
Matthews, NC
Amplified music in Matthews requires special event permits when held outdoors in public spaces; residential amplified sound is subject to the plainly audible...
Matthews, NC
Aircraft noise in Matthews is governed exclusively by federal FAA regulations; local ordinances cannot regulate aircraft operations or altitudes.
See how Matthews's retaining walls rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.