Swimming Pools & Spas in Eagan, MN (2026)
5 verified swimming pools & spas rules for Eagan, Minnesota, sourced directly from the municipal code and official government pages.
Verified from official government sources
Pool Permits
Eagan requires a building permit for swimming pools, hot tubs, and whirlpools, with one exception: above-ground pools holding less than 5,000 gallons and less than 24 inches deep. Eagan defines a pool as artificial water deeper than 24 inches and over 150 square feet. Permits are valid 180 days, and electrical and gas work must meet code.
Eagan Swimming Pool Permits
Some RestrictionsFencing Requirements
Eagan requires in-ground pools to be enclosed by a fence at least 4 but not more than 6 feet high, at least 4 feet from the pool edge, with the bottom no higher than 4 inches above ground. Gates must be self-closing, self-latching, and lockable. Above-ground pools with 4-foot walls and a removable/locked ladder may be exempt.
Eagan Pool Fencing Requirements
Heavy RestrictionsSafety Rules
Beyond fencing, Eagan's pool safety rules include National Electrical Code wiring, an approved pressure relief valve on heaters, gas piping of copper/welded iron/stainless steel buried at least 12 inches deep, and carbon monoxide detectors (required by law in single-family homes). Pool water must go to the sanitary sewer or be de-chlorinated a week before draining onto pervious ground.
Eagan Pool Safety Rules
Some RestrictionsAbove-Ground Pools
In Eagan, an above-ground pool needs a building permit unless it holds less than 5,000 gallons AND is less than 24 inches deep. It can skip the perimeter fence if it has at least 4-foot walls plus a self-latching lockable gate, or if the only access is a removable ladder taken away when not in use. Setbacks still apply.
Eagan Above-Ground Pool Rules
Some RestrictionsHot Tub Rules
Eagan regulates hot tubs, whirlpools, and spas under its Swimming Pool, Hot Tub, and Whirlpool guidance. A unit deeper than 24 inches and over 150 square feet meets the pool definition and needs a building permit; smaller spas follow the same guidance and the Minnesota State Building Code. Electrical work must meet the National Electrical Code, and setback rules apply.