Industrial and stationary noise sources in unincorporated Riverside County must meet Ordinance No. 847's Table 1 limits (Light Industrial 75/55, Heavy Industrial 75/75 dBA). The General Plan Noise Element adds a stationary-source standard of 45 dBA (10-min Leq) at night and 65 dBA by day at sensitive uses.
Industrial and stationary noise is regulated on two tracks in unincorporated Riverside County. First, the enforceable Ordinance No. 847 sets maximum exterior sound levels at the receiving property line: Light Industrial is 75 dBA (day) / 55 dBA (night), and Heavy Industrial is 75 dBA day and night, while a sound received at a residence is still capped at the residential limit (typically 55 dBA day / 45 dBA night). Power tools and equipment are a special source under Section 6(b): they may not be audible inside any inhabited dwelling between 10:00 p.m. and 8:00 a.m., or audible more than 100 feet from the source at other times. Second, the General Plan Noise Element (GPA No. 960) provides planning-level stationary-source standards used when reviewing new projects. Table N-2 lists exterior standards for noise received at residential uses of 45 Leq (10-minute) from 10:00 p.m. to 7:00 a.m. and 65 Leq (10-minute) from 7:00 a.m. to 10:00 p.m., with interior standards of 40 and 55 Leq; Policy N 4.1 likewise prohibits facility-related noise at any sensitive use from exceeding 45 dBA (10-min Leq) at night and 65 dBA (10-min Leq) by day. The Noise Element notes special producers such as the area's natural-gas valve stations near Cabazon, where venting can exceed 140 dB Leq at 50 feet. New or expanding industrial projects are routinely required to submit acoustical studies and mitigation.
Industrial or stationary-source noise that exceeds the Ordinance No. 847 Table 1 limits at a neighboring property is enforced under the same penalty scheme: $500, $750 and $1,000 minimum fines for escalating violations in a 180-day period, each day a separate offense. Project-level Noise Element standards are enforced through conditions of approval and permits.
Other ordinances people look up for this city. Green dot = verified primary-source excerpt.
Riverside County, CA
Under County Ordinance 413, only the Director of Transportation may paint curbs to mark parking rules in the unincorporated county. Red means no stopping, ye...
Riverside County, CA
County Ordinance 413, Section 1.9, lets the Director of Transportation establish loading and passenger loading zones marked by colored curbs. Yellow zones al...
Riverside County, CA
Movement of oversize or overweight vehicles on unincorporated Riverside County roads requires a permit from the road commissioner under County Code Chapter 1...
Riverside County, CA
Common fencing materials - wood, vinyl, masonry block, and metal - are permitted in unincorporated Riverside County, subject only to Ordinance No. 348 Sectio...
Anza, CA
Anza is an unincorporated community in Riverside County governed by Riverside County Ordinance 787 (Fire Code) and the California Fire Code §307. Backyard re...
Riverside County, CA
California's SB 1383 requires diverting organic waste from landfills. In unincorporated Riverside County, where green-cart organics collection is offered, re...
Side-by-side rule comparisons with other cities in Riverside County.
See how other cities in Riverside County handle industrial noise.
See how Anza's industrial noise rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.