FEMA flood zone rules in Tulare County, CA — also called floodplain regulations or special flood hazard area (SFHA) rules — determine flood insurance requirements and elevation standards for new construction.
Tulare County participates in the National Flood Insurance Program and regulates development in Special Flood Hazard Areas under Ordinance Code Part 7, Chapter 27 (Flood Damage Prevention). FEMA's Flood Insurance Study for Tulare County and accompanying FIRMs, originally dated September 29, 1986 and updated by subsequent revisions, are adopted by reference as the regulatory basis for unincorporated lands.
Tulare County Ordinance Code Part 7, Chapter 27 (Flood Damage Prevention) is the County's NFIP-compliant floodplain management ordinance. The chapter adopts by reference the FEMA Flood Insurance Study for Tulare County, dated September 29, 1986, along with the accompanying Flood Insurance Rate Maps (FIRMs) and Flood Boundary and Floodway Maps and all subsequent amendments. Development in a designated Special Flood Hazard Area (SFHA) - typically Zone A, AE, or AO on the FIRM - requires a floodplain development permit from Tulare County Public Works in addition to a standard building permit. Standards mirror 44 CFR section 60.3 NFIP minimums: residential structures must have the lowest floor (including basement) elevated at or above the Base Flood Elevation (BFE); non-residential structures must be elevated or dry-floodproofed to BFE; all structures must be anchored to resist flotation, collapse, and lateral movement; and flood-resistant materials must be used below the BFE. Development in a designated regulatory floodway is prohibited unless a no-rise hydraulic analysis demonstrates no increase in BFE. Tentative subdivision maps must identify SFHAs, and elevation certificates may be required at final inspection. Properties in an SFHA with federally backed mortgages are subject to mandatory NFIP flood insurance under 42 U.S.C. section 4012a. Contact: Tulare County RMA Public Works Flood Control (559) 624-7000.
Building, filling, grading, or substantially improving a structure in an SFHA without a Tulare County floodplain development permit, or below the required BFE, can trigger stop-work orders, denial of certificate of occupancy, mandatory removal or elevation of the structure, NFIP probation or suspension affecting countywide insurance availability, and civil penalties under Part 7 Chapter 27.
Other ordinances people look up for this city. Green dot = verified primary-source excerpt.
Tulare County, CA
In unincorporated Tulare County, loading zones are designated by curb color under County Code 3-03-1126: yellow indicates a loading zone for freight or passe...
Tulare County, CA
Unincorporated Tulare County has an expedited, streamlined permitting process for electric vehicle charging stations under County Ordinance Code Chapter 7-32...
Tulare County, CA
Unincorporated Tulare County has no blanket size-based street-parking ban, but County Code 3-03-1015 prohibits parking commercial vehicles rated 10,000 pound...
Tulare County, CA
Tulare County's Zoning Ordinance does not prohibit common residential fence materials such as wood, vinyl, chain-link, or masonry. The only material-specific...
Tulare County, CA
Beyond general height limits, Tulare County's Zoning Ordinance imposes specific fence requirements in certain situations: commercial off-street parking lots ...
Tulare County, CA
Retaining walls in unincorporated Tulare County follow the adopted California Building Code. Under CBC Section 105.2, a building permit is not required for a...
See how Tulare County's flood zones rules stack up against other locations.
Help us keep this page accurate. If you notice an error or outdated information, let us know.