Skip to main content
CityRuleLookup

Seminole County, FL Fence Regulations: Height Limits (2026)

Some Restrictions
Compiled from the official code textEditor Martyn O'NeillLast verified September 2026

Key Facts

Uniformity
Same design, material, color
Condition
Original upright condition
Defaced fences
Promptly restored
Missing parts
Replace with same type/quality
Code section
LDC 30.14.19(k)-(n)

Summary

LDC Sec. 30.14.19(k)-(n) requires fences to be uniform in construction, design, material, color and pattern, kept in their original upright condition, restored promptly if defaced, and to have missing boards, pickets, posts or bricks replaced with the same type and quality of material.

These county ordinances apply to unincorporated areas of Seminole County. Incorporated cities within the county may have their own rules that take precedence over county-level regulations.

A fence shall be uniform in construction, design, material, color and pattern, and the fence material shall be a standard material conventionally used by the fence industry... All fences shall be maintained in their original upright condition... Missing boards, pickets, posts or bricks shall be promptly replaced with material of the same type and quality.

View official code

Official source re-checked September 7, 2026: no newer edition of the code had been published (publisher’s edition: Code of Ordinances: Supplement 23 Update 1 | Land Development Code: Supplement 2).

Full Breakdown

Beyond height, Seminole County LDC 30.14.19 sets construction and maintenance standards. A fence must be uniform in construction, design, material, color and pattern, and the material must be standard material conventionally used by the fence industry (subsection k). All fences must be maintained in their original upright condition (subsection l). Fences or walls designed for painting or a similar finish must be kept in their original designed condition, and any defaced wall or fence must be promptly restored (subsection m). Missing boards, pickets, posts or bricks must be promptly replaced with material of the same type and quality, subject to the permit rule (subsection n). Gates share the same height limits and setbacks as fences (subsection o).

Violations & Fines

A leaning, defaced, or non-uniform fence is a code violation enforceable by Seminole County Code Enforcement, which may order repair or replacement. Continued noncompliance proceeds to the Code Enforcement Board/Special Magistrate, with daily civil penalties available under F.S. Chapter 162.

Frequently Asked Questions

Does my fence have to match on all sides in Seminole County?
Yes. LDC 30.14.19(k) requires a fence to be uniform in construction, design, material, color and pattern, using standard fence-industry materials.
Can the county cite me for a leaning or broken fence?
Yes. LDC 30.14.19(l)-(n) requires fences to stay in their original upright condition, be restored if defaced, and have missing boards, pickets, posts or bricks promptly replaced with matching material.

Sources & Official References

Other rules in Seminole County

All Seminole County rules

How Seminole County compares: Cities That Allow the Tallest Residential Fences·Florida rules heatmap·Compare Seminole County to another location·View the Florida fence regulations overview

Get notified when Height Limits in Seminole County, FL changes

We'll email you the moment we detect a change in the code. No spam, unsubscribe anytime.

We'll never sell or share your email. One-click unsubscribe in every email.

See something wrong?

Help us keep this page accurate. If you notice an error or outdated information, let us know.